Body work advice
#1
Member
Thread Starter
Join Date: Feb 2017
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Body work advice
Hi guys,
I am trying to figure out what would be the best way to tackle some body damage to my Cherokee. This summer I am planning on monstalining the entire jeep, so I would like to get these taken care of for the long haul. Had a roof rack w/ spare tire on the top then got in an accident and it got ripped off. Is this weldable? Would it be better to use a sealant and a piece of metal?
This is the worst area on the jeep, previous owner used epoxy and sheer metal screws to re attach fender. Is to too much rust for a cut and fold?
I am trying to figure out what would be the best way to tackle some body damage to my Cherokee. This summer I am planning on monstalining the entire jeep, so I would like to get these taken care of for the long haul. Had a roof rack w/ spare tire on the top then got in an accident and it got ripped off. Is this weldable? Would it be better to use a sealant and a piece of metal?
This is the worst area on the jeep, previous owner used epoxy and sheer metal screws to re attach fender. Is to too much rust for a cut and fold?
Thread
Thread Starter
Forum
Replies
Last Post
wheelerboy12
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
11-02-2013 11:40 AM
XJEEP01
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
07-11-2013 01:14 PM
mtbfreak612
Modified XJ Cherokee Tech
15
06-14-2012 02:18 PM
95XJ2DR4L5SPD
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
03-04-2008 07:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)