Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Best slave/mast asssembly replacement?

Thread Tools
 
Search this Thread
 
Old 06-02-2015, 01:04 PM
  #1  
Junior Member
Thread Starter
 
adamj's Avatar
 
Join Date: Jun 2014
Location: Colorado
Posts: 90
Likes: 0
Received 1 Like on 1 Post
Year: 1990
Model: Cherokee
Engine: 4.0L
Default Best slave/mast asssembly replacement?

Who makes the best clutch slave/master cylinder assembly (pre-bled)?
I only want to do this job once and price is not a restriction. Are mopar ones still available? Part #? I'll buy from dealer if I have to...

This is for a 1995 with AX-15 btw (ignore signature)

Here are the ones I've found so far:

Crown Automotive: http://www.quadratec.com/products/52004+05.htm

AMS:
http://www.amazon.com/AMS-Clutch-Cylinder-Assembly-Cherokee/dp/B001I0ML5S/ref=lh_ni_t?ie=UTF8&psc=1&smid=A1ATZ3MAARQNEF http://www.amazon.com/AMS-Clutch-Cylinder-Assembly-Cherokee/dp/B001I0ML5S/ref=lh_ni_t?ie=UTF8&psc=1&smid=A1ATZ3MAARQNEF


Perfection Clutch: http://shop.advanceautoparts.com/p/p...9-P#fragment-1

Omix-Ada: http://shop.advanceautoparts.com/p/o...m=clutch+slave

Last edited by adamj; 06-02-2015 at 08:32 PM.
Old 06-03-2015, 11:01 PM
  #2  
Junior Member
Thread Starter
 
adamj's Avatar
 
Join Date: Jun 2014
Location: Colorado
Posts: 90
Likes: 0
Received 1 Like on 1 Post
Year: 1990
Model: Cherokee
Engine: 4.0L
Default

In terms of brands, are Omix ada and crown still good? Have not heard of the other two, but I have seen these two make jeep-specific parts.
Old 06-04-2015, 11:28 AM
  #3  
Seasoned Member
 
LaredoBucket's Avatar
 
Join Date: Jul 2009
Location: Los Angeles
Posts: 306
Likes: 0
Received 0 Likes on 0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L HO
Default

Originally Posted by adamj
In terms of brands, are Omix ada and crown still good? Have not heard of the other two, but I have seen these two make jeep-specific parts.
What is wrong with the old slave/mast?

The plastic line on my Slave Cylinder cracked on my 92 5 Speed. I couldn't find a replacement anywhere without buying the whole Slave/reservoir. So I bought a braided line from these guys. It was an easy install. Here's a kit that should work well for you. You may want to call them to make sure it is compatible. Best of luck.

http://www.advanceadapters.com/produ...-nv3550--ax15/

Last edited by LaredoBucket; 06-04-2015 at 02:49 PM.
Old 06-04-2015, 01:52 PM
  #4  
Senior Member
 
Cheddarnut's Avatar
 
Join Date: Apr 2015
Location: Connecticut
Posts: 734
Likes: 0
Received 2 Likes on 2 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
Default

Originally Posted by adamj
In terms of brands, are Omix ada and crown still good? Have not heard of the other two, but I have seen these two make jeep-specific parts.
I have ordered some crown stuff that's ok, but my experience with omix ada has been mostly low quality. I try to avoid them if possible.
Old 06-05-2015, 01:18 PM
  #5  
Junior Member
Thread Starter
 
adamj's Avatar
 
Join Date: Jun 2014
Location: Colorado
Posts: 90
Likes: 0
Received 1 Like on 1 Post
Year: 1990
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by Cheddarnut
I have ordered some crown stuff that's ok, but my experience with omix ada has been mostly low quality. I try to avoid them if possible.
Thanks, good to know.


Has anybody ever heard of Perfection Clutch or AMS?
Old 06-06-2015, 11:32 PM
  #6  
Junior Member
Thread Starter
 
adamj's Avatar
 
Join Date: Jun 2014
Location: Colorado
Posts: 90
Likes: 0
Received 1 Like on 1 Post
Year: 1990
Model: Cherokee
Engine: 4.0L
Default

Anybody ever buy a mopar one? Are they still available?
Old 06-06-2015, 11:47 PM
  #7  
Banned
 
Jeep Driver's Avatar
 
Join Date: Jan 2014
Posts: 1,054
Likes: 0
Received 2 Likes on 1 Post
Model: Cherokee
Default

http://www.partsgeek.com/gbproducts/...GBQxoCQPTw_wcB


http://www.nextdayauto.com/1994-jeep...3-1837360.html

Last edited by Jeep Driver; 06-06-2015 at 11:50 PM.
Old 06-06-2015, 11:51 PM
  #8  
Banned
 
Jeep Driver's Avatar
 
Join Date: Jan 2014
Posts: 1,054
Likes: 0
Received 2 Likes on 1 Post
Model: Cherokee
Default

Check your dealer for a rebuild kit.

They are rebuildable.
Old 06-09-2015, 12:06 AM
  #9  
Junior Member
Thread Starter
 
adamj's Avatar
 
Join Date: Jun 2014
Location: Colorado
Posts: 90
Likes: 0
Received 1 Like on 1 Post
Year: 1990
Model: Cherokee
Engine: 4.0L
Default

I found a Mopar slave/master assembly on eBay, but it is not pre-bled. How difficult is it to bleed this hydraulic system? Can I do it before I install it in the vehicle? I remember reading that it is a pain to bleed and that's why I wanted to get a pre-bled one, but now that I found a Mopar, I would like to go with that one and see if I can bleed it myself.
Old 06-09-2015, 06:40 AM
  #10  
Banned
 
Jeep Driver's Avatar
 
Join Date: Jan 2014
Posts: 1,054
Likes: 0
Received 2 Likes on 1 Post
Model: Cherokee
Default

Originally Posted by adamj
I found a Mopar slave/master assembly on eBay, but it is not pre-bled. How difficult is it to bleed this hydraulic system? Can I do it before I install it in the vehicle? I remember reading that it is a pain to bleed and that's why I wanted to get a pre-bled one, but now that I found a Mopar, I would like to go with that one and see if I can bleed it myself.

The original Mopar has a bleed screw in the slave.......easy to bleed, you'll be fine.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
Jose Calderon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
17
09-17-2015 08:57 PM
Zeke P. Lucas
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-30-2015 05:42 PM
David Chauncey Clothier
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-29-2015 09:31 PM
Zerocyde
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-24-2015 10:56 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Best slave/mast asssembly replacement?



All times are GMT -5. The time now is 12:10 AM.