jd4x426

I was looking at the ausie locker but they only seem to have it for 29 spline 8.25 i have the 27 spline my question is can i just get the 29 spline shafts and put them in with the 29 spline locker any info would be appreciated

gabe

Yes,the aussie locker has new axle gears that will be a 29 spline or which ever you buy.So all you would need is the shafts.I put an aussie in my front and it was 27 spline,but maybe they dont make a 27 for the 8.25.

BuckB91XJ

You guys are both right on. Aussie Locker does not make a unit for the 27 spline Chrysler 8.25. They only make one for the 29 spline model. They realized a problem with the one they were selling for the 27 spline. A lot of people were returning them broken.

jd4x426

well are there problems with 29 spline also im either getting the ausie or the powertrax

BuckB91XJ

No problems reported with the 29 spline 8.25 Aussie. I can tell you from personal experience. I've beat the heck out of the Aussies in my front D30 and rear D44. These things are damn tough. You'll break an axle or carrier before that Locker will break.

tupton

You can get a Lock rite for a 27 spline

BuckB91XJ

And Lock Rites are good units as well. I had them F&R in my Toyota. they were just a little more expensive than the Aussies so when it came time to buy for the XJ, I got Aussies.