Any one use this cam?
#1
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Any one use this cam?
http://www.lunatipower.com/Product.aspx?id=2389&gid=297
will this work with my stock efi?
its going into a stroker engine
Product Description
Lunati's Voodoo series of Hydraulic camshafts deliver more area under the curve than any other series of Hydraulic camshafts. This means more throttle response, quicker acceleration, more vacuum, better efficiency, combined with maximum horsepower and torque!Hydraulic. Hot Street or bracket cam for 258 c.i. engines. Will need aftermarket induction, 10:1 or better compression, 2800-3000 stall speed converter and 3.73-4.11 gears. Likes up to 200 HP nitrous. Cam has a very rough idle quality!
Previoius Part Number: 63503LK
will this work with my stock efi?
its going into a stroker engine
Product Description
Lunati's Voodoo series of Hydraulic camshafts deliver more area under the curve than any other series of Hydraulic camshafts. This means more throttle response, quicker acceleration, more vacuum, better efficiency, combined with maximum horsepower and torque!Hydraulic. Hot Street or bracket cam for 258 c.i. engines. Will need aftermarket induction, 10:1 or better compression, 2800-3000 stall speed converter and 3.73-4.11 gears. Likes up to 200 HP nitrous. Cam has a very rough idle quality!
- Advertised Duration (Int/Exh): 268/276
- Duration @ .050 (Int/Exh): 226/234
- Gross Valve Lift (Int/Exh): .527/.547
- LSA/ICL: 110/106
- Valve Lash (Int/Exh): Hyd/Hyd
- RPM Range: 2000-6000
- Includes: Cam Kit
Previoius Part Number: 63503LK
#4
CF Veteran
Join Date: Dec 2011
Location: PA KOTUFU!
Posts: 1,777
Likes: 0
Received 16 Likes
on
15 Posts
Year: 1998
Engine: 4.0L 162,000
That is a lot of cam timing 226/234. Would have poor idle vacuum and the MAP and ECU wont like it and probably not idle well.
.527/.547" lift will require different springs, ? heavier, and heavier springs wipe out cam lobes?
There are better cam choices out there for stock efi stroker.
.527/.547" lift will require different springs, ? heavier, and heavier springs wipe out cam lobes?
There are better cam choices out there for stock efi stroker.
#5
CF Veteran
Join Date: Nov 2011
Location: Northern MN
Posts: 2,433
Likes: 0
Received 6 Likes
on
5 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: Renix 4.0
Maybe this would be a better choice?
http://www.compcams.com/Company/CC/c...x?csid=10&sb=2
The title says 'Great Stock Replacement' but then it also says 'Not for fuel injection' below. Maybe it's just flat tappets...
http://www.compcams.com/Company/CC/c...x?csid=10&sb=2
The title says 'Great Stock Replacement' but then it also says 'Not for fuel injection' below. Maybe it's just flat tappets...
Thread
Thread Starter
Forum
Replies
Last Post
JayneCobb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
26
08-11-2020 03:22 PM
zumer715
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
10-03-2015 07:07 PM
JamDeeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 08:50 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)