chrish001

I have a 98 cherokee sport 4.0L. There is a vibration due to the shaft and flange being worn out on the transfer case. The shop is saying I need a new transfer case. I asked if they could just replace the parts because it is going to be $700. They said the labor would be more expensive to tear it down. I don't need 4wd. I just need a vehicle to drive. My question is how hard would this be to change myself. I am somewhat mechanically inclined. Also, how do you tell the difference between types? I also would like to know if the shaft that comes out of the transfer case runs through the transmission too. The shop had metioned there may be a way to bypass the transfer case but then said they didn't find a way to do it. Any suggestions are helpful. Thanks.

posjeepxj

where ya from?

chrish001

florida

posjeepxj

do it yourself

get a 14m gear wrench

http://car-part.com/


i did the search for ya but link didnt work. so just type in your info and find one. $200 with similar miles is what i would shoot for