97 XJ 4wd auto
#1
Junior Member
Thread Starter
97 XJ 4wd auto
Shifter will not move below drive, unable to manually select 1/2 and 3 gear positions
Has anyone else had this? The transmission is operating normally and I think this is a failure to the gearshift.
Has anyone else had this? The transmission is operating normally and I think this is a failure to the gearshift.
Last edited by odie64; 10-21-2018 at 05:53 AM.
#2
Beach Bum
#3
Junior Member
Thread Starter
#4
CF Veteran
Join Date: Oct 2015
Posts: 7,355
Likes: 0
Received 1,530 Likes
on
1,173 Posts
Year: 2000
Model: Cherokee (XJ)
Pop off the shifter bezel. See if there is anything down there. I know there is a cover where they could get in but you would be surprised what can get down there. Old girlfriend of mine had a habit of putting her hair scrunchys and rubber bands around the shifter. One time could not move it. They had a habit of working there way down in there.
#6
Junior Member
Thread Starter
Problem solved
I found two issues, first the plastic insert in the shifter lever was broken.after replacing that part that could be described as some sort of beeds, I also found the lock/release bottom on the shifter T handle was also faulty. The insert is available from dorman for around $15-20 depends on where you look. Have not sourced a replacement T handle yet
#7
Junior Member
Join Date: Jan 2018
Location: Western, Ohio
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0 Liter Inline-6
Had a similar problem today, Jeep wouldn't go into park. I'm thinkin that maybe sense the cover for the middle console is off maybe
something got stuck down in there..
--------------------------------------------------
00' XJ Sport//Dana-35 axle// Pioneer Radio// Browning floor mats// Wrangler bumpers// Gadsden sticke (Daily Driver)
97' Dodge 3500 5.9L Hemi// (Sittin for 5 years and transmissions a giant POS)
something got stuck down in there..
--------------------------------------------------
00' XJ Sport//Dana-35 axle// Pioneer Radio// Browning floor mats// Wrangler bumpers// Gadsden sticke (Daily Driver)
97' Dodge 3500 5.9L Hemi// (Sittin for 5 years and transmissions a giant POS)
Trending Topics
#8
Junior Member
Thread Starter
CORRECTION:
I have discovered that Jeep in their infinite wisdom has at least 3 different bead inserts in the shaft of the auto shifter.. I have been using the shorter ones that do not reach up into the handle . I now have a longer piece in there now that is either too long or I still have a small piece of the original insert still inside of the shifter shaft. I need to use some magic fingers to try and remove a possible broken piece or there is a fourth size that is just slightly shorter than the piece I am using now. Right now the shifter handle locks onto the shifter and I can select all gears, but the shifter detent does not work. The insert sets up in the handle too high jamming the release button from moving. Pics to follow
I have discovered that Jeep in their infinite wisdom has at least 3 different bead inserts in the shaft of the auto shifter.. I have been using the shorter ones that do not reach up into the handle . I now have a longer piece in there now that is either too long or I still have a small piece of the original insert still inside of the shifter shaft. I need to use some magic fingers to try and remove a possible broken piece or there is a fourth size that is just slightly shorter than the piece I am using now. Right now the shifter handle locks onto the shifter and I can select all gears, but the shifter detent does not work. The insert sets up in the handle too high jamming the release button from moving. Pics to follow
Thread
Thread Starter
Forum
Replies
Last Post
ericfx1984
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
01-09-2013 01:33 PM
parkerbabco
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
03-16-2009 04:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)