could you 97+ xj guys do me a favor please? could you go under your jeep, look at the second o2 sensor(between cat and muffler) and follow the wires from the sensor up to the connector. the sensor should have a black a grey and two white wires coming off from it.
what i need to know is at the connector what colors connect to what colors?

see my wires fell down from the holder thingy and the drive shaft caught and pulled them right out of the connector so i have no clue what connects to what. if possible a picture would be really great!
thanks
i would really appreciate it

 

anyone? i really wanna fix this, just need to know what color wire the grey connects to, what the black connects to, and the two whites also

 

Id help but I have an 01 and I have two seperate o2 sensors after the cat, because of the front and rear exhuast manifold.

 

I don't know if this will help or not, but I'll post it anyways. I think this is the connector you're talking about. I don't want to mess with anything, because I am not mechanically inclined.



And here's the other side of the connector:



It's hard to get the same angle shot with my camera, that's why their different.

I only see 3 wires, and it looks like one of the white ones connects to green, the other white one connects to the yellow/black striped (not sure if it's actually those colors), and the grey connects to orange (also not sure if it's orange). I couldn't actually see the wires, I just had to hold the camera up, and it took a pic of the wires at the connector. If there's a 4th wire, I don't see it, or maybe you're talking about a whole different connector.

 

thank your green your a life saver

 

perfect!

 

Glad I could help.