![]() |
97 cherokee,check engine light
Hello, I hope someone can give me some info, my 97 Cherokee has a check engine light on. I went and had the codes run and it shows P0705 and p0700, all they told me is its a trans axle module or has a fault or failed range sensor. any help would be appreciated thank you
|
Neutral safety switch attached to the side of the transmission. ( it's the "range sensor"- senses which "range" you've put the shifter in: Reverse, Park, Drive, etc)
There are write-ups on cleaning and adjusting it, which normally takes care of the problem. |
Thank you Radi very much appreciated!
|
Here's a good in detail write up on how to clean it.
http://www.bc4x4.com/tech/2010/jeep-...ty-switch-nss/ |
Originally Posted by RTorrez1
(Post 2610520)
Here's a good in detail write up on how to lean it.
http://www.bc4x4.com/tech/2010/jeep-...ty-switch-nss/ |
Originally Posted by -ND4SPD-
(Post 2610542)
Great info & write up. Thanks
I know it helped me when I had to work on mine. |
| All times are GMT -5. The time now is 10:02 AM. |
© 2026 MH Sub I, LLC dba Internet Brands