96 cherokee sport 4 door
#1
Member
Thread Starter
Join Date: Mar 2011
Location: Middlesex, New Jersey
Posts: 229
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 1998 4.0L Inline 6
96 cherokee sport 4 door
I have a 96 Cherokee sport 4door 4wheel drive 4.0 straight 6 ad I wanna know what necessary mods should be made to the truck. Also I wanna know what mods I can and can't do. I already know I can't run bigger that 33's because I have a Dana 35 in the rear. Right now my plan is lift it 4.5" with 32's on 15's. Some fender flares and push grill/brush guard. A cold air intake and custom exhaust. Is there anything I should do or that I can't do? Thanks for the help guys and opinions are welcome
#2
Member
Join Date: Oct 2010
Location: Texas
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 litre 6 cylinder
Dont put on exhaust bigger than 2.5", you will lose low end torque
Also don't remove your cat, its a federal offense (I think)
happy modding
Also don't remove your cat, its a federal offense (I think)
happy modding
#4
Member
Thread Starter
Join Date: Mar 2011
Location: Middlesex, New Jersey
Posts: 229
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 1998 4.0L Inline 6
Well what I'm doing is is a full exhaust... Headers and everything... All stainless steel... Banks headers to a high flow cat then a y pipe the splits to 2 45 angles where the 2 magnaflow mufflers the two two more 45s and come our infront of the rear wheels one tip on each side...
#6
Junior Member
Join Date: May 2011
Location: n. nevada
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Year: 88 & 93
Model: Cherokee
Engine: 4.0
Sounds cool. I have 93 two door sport. I ran straight pipe into flowmaster super 44 with a resonator from newer challenger to keep the drone noise down. It sounds great.
#7
Member
Thread Starter
Join Date: Mar 2011
Location: Middlesex, New Jersey
Posts: 229
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 1998 4.0L Inline 6
i desided to not do my original plan and completely re fabricated a chevy colorado Gibson exhaust to fit my xj... spent 40 bucks on muffler back exhaust from a buddy of mine chopped welded and made it fit... its a 2.25 inlet with dual 1.35 outlest and come stright out the back.. sounds tough its lighter looks better and is a lot faster... im happy with it
Trending Topics
#8
Member
Thread Starter
Join Date: Mar 2011
Location: Middlesex, New Jersey
Posts: 229
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 1998 4.0L Inline 6
heres what it looks like from the back
https://www.cherokeeforum.com/member...12-clean-4.jpg
in this one you can kinda see the tips from the side
https://www.cherokeeforum.com/member...10-clean-2.jpg
https://www.cherokeeforum.com/member...12-clean-4.jpg
in this one you can kinda see the tips from the side
https://www.cherokeeforum.com/member...10-clean-2.jpg
#10
CF Veteran
Join Date: Feb 2011
Location: Bergen County, New Jersey U.S.A.
Posts: 3,074
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990 Laredo
Model: Cherokee
Engine: 4.0 Inline 6 Renix
Do you have any recovery points? I would get a class 3 or 4 rear tow hitch and front tow hooks... Do you have any skid plates? if not I would get those 2.. a brush guard can do more damage then good... your exhaust looks good...
and as for looks you can tint the windows and add some clear side markers...
http://www.ebay.com/itm/84-96-JEEP-C...item56473cb8ff
hope this advice helps
the jeep looks good don't see to many in that color
and as for looks you can tint the windows and add some clear side markers...
http://www.ebay.com/itm/84-96-JEEP-C...item56473cb8ff
hope this advice helps
the jeep looks good don't see to many in that color
Last edited by The Rooster; 11-26-2011 at 11:20 AM.
#13
Member
Thread Starter
Join Date: Mar 2011
Location: Middlesex, New Jersey
Posts: 229
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 1998 4.0L Inline 6
Do you have any recovery points? I would get a class 3 or 4 rear tow hitch and front tow hooks... Do you have any skid plates? if not I would get those 2.. a brush guard can do more damage then good... your exhaust looks good...
and as for looks you can tint the windows and add some clear side markers...
http://www.ebay.com/itm/84-96-JEEP-C...item56473cb8ff
hope this advice helps
the jeep looks good don't see to many in that color
and as for looks you can tint the windows and add some clear side markers...
http://www.ebay.com/itm/84-96-JEEP-C...item56473cb8ff
hope this advice helps
the jeep looks good don't see to many in that color
#15
Member
Thread Starter
Join Date: Mar 2011
Location: Middlesex, New Jersey
Posts: 229
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 1998 4.0L Inline 6
no pictures yet... its a 12" white led strip... i had it out side of the filter housing and 2 of my cop buddies pulled me over in my driveway one night and said i cant have a multi bulb license plate light... plus it was soo bright once the truck was far enough you could still see the light but not the tail lights... so what i did was i folded the strip in half tucked it inside original housing/filter and it dimmed it down so its not as bright and you cant tell that its a multi bulb system...
in the day time you cant really see it but at night it makes a world of difference
in the day time you cant really see it but at night it makes a world of difference