LadyKenai

hey,

ive tried many different size screws to get the bottom panel of my dash together as final touch after restoring the whole interrior cause those got lost, its the panel that goes from left to right with the ashtrash in the middle

i want to find the right screw size so i dont mess up the threads i believe it albout 6 or 8 screws..

does anyone know the size or thread, i dont have any of them to match it up at the hardware store.

thank you,
- Marc

XJIrish4x4

Pretty sure you can source those online from a Jeep site that allows for restorations. Something like this but mind you it is for grand Cherokee. Might be the same size.

https://www.quadratec.com/p/omix-ada...wj-wrangler-tj

Ralph77

So just guessing here. #'s 3, 4, or 6? Click on it will make it bigger.

So it appears #3 might be a M4.2x1.41x13.00

https://www.quadratec.com/p/omix-ada...-jeep-vehicles

#4

http://www.omix-ada.com/screw-headli...-yj-cj-mj.html

https://www.4wheelparts.com/Interior...pn=OAI12038.02

Sorry could not find anything for #6. I am just guessing here on all this.

This might help.

http://www.jeepforum.com/forum/f53/d...-size-3581738/

LadyKenai

thank you kindly

sometimes im just looking too hard for the simplest things

https://www.quadratec.com/p/omix-ada...xj-comanche-mj

marc

LadyKenai

ah thanks again, i know they all look the same but tiny differences

LadyKenai

seems like its number 3

XJIrish4x4

I agree I do the same with searching for things sometimes. Now that I have more experience with the XJ's I can find parts a lot easier. Before though I would have asked a million times whats this, where is this, how can I get this, etc. But that is why we are here to help one another so no matter what I will always offer advice if I think it will help.

LadyKenai

yes true we all learn over time and if i see someone asking a question about something i did myself i will give the best advice i can but on other matter i dont comment at all and just follow their posts and learn about issues ive didnt run into .. yet hehe

Marc

Ralph77

One thing that helps me is having downloads of every year of XJ parts catalogs. When ever I comment on something if I have first hand experience I say so. Poking around on the forums and internet you read things. Then somebody poses a question on stuff that you have done a little reading on but have no first hand experience with. I will comment on that but use phrases like "My understanding is" or "From poking around on the internet it appears", ETC.