92 Clutch Master Cylinder Replacement
09-20-2012, 08:16 AM
#3
CF Veteran
Join Date: Nov 2011
Location: Edmonton
Posts: 2,322
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: 4.0
be on the lookout for high levels of blood pressure and the use of harsh invectives.
What makes you think the master is done? Hows the slave...?
What makes you think the master is done? Hows the slave...?
09-20-2012, 02:07 PM
#5
Newbie
Thread Starter
Join Date: Dec 2011
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hankthetank
be on the lookout for high levels of blood pressure and the use of harsh invectives.
What makes you think the master is done? Hows the slave...?
What makes you think the master is done? Hows the slave...?
09-20-2012, 07:12 PM
#6
CF Veteran
Join Date: Nov 2011
Location: Edmonton
Posts: 2,322
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: 4.0
well ok then...simple fix if you're a contortionist. if not, like me, then its only a little more difficult. careful trying to get the hyd line off...its easy to round off. a crow foot wrench is good for these. change the line too. i upgraded mine to stainless braided with heat shielding. you could buy a master rebuild kit too. i let mine gravity bleed (internal slave here) instead of buying a vac pump, worked fine. make sure all the fluid in the system is perfect. contamination destroys ALL the seals in short order, ask me how i know...or don't.
Last edited by hankthetank; 09-20-2012 at 07:15 PM.
09-20-2012, 07:34 PM
#7
Newbie
Thread Starter
Join Date: Dec 2011
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hankthetank
well ok then...simple fix if you're a contortionist. if not, like me, then its only a little more difficult. careful trying to get the hyd line off...its easy to round off. a crow foot wrench is good for these. change the line too. i upgraded mine to stainless braided with heat shielding. you could buy a master rebuild kit too. i let mine gravity bleed (internal slave here) instead of buying a vac pump, worked fine. make sure all the fluid in the system is perfect. contamination destroys ALL the seals in short order, ask me how i know...or don't.
Trending Topics
09-20-2012, 09:17 PM
#8
CF Veteran
Join Date: Nov 2011
Location: Edmonton
Posts: 2,322
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: 4.0
i got mine at a local perf shop. its adapted from tube fitting to -an fittings. all i did was bring in my old one and they matched it all up for me. all said and done i paid about $120 for the line and heat wrap though.a little pricey, but i think its worth it.
Thread
Thread Starter
Forum
Replies
Last Post
Zeke P. Lucas
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-30-2015 05:42 PM
madmanmarty
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
30
08-30-2015 03:17 PM
JWB37
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-29-2015 12:03 PM
britishcolumbia
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-28-2015 04:08 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)