Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here (https://www.cherokeeforum.com/f2/)
-   -   89 jeep cherokee tailgate strut keeps poping off (https://www.cherokeeforum.com/f2/89-jeep-cherokee-tailgate-strut-keeps-poping-off-250702/)

blazer 2008 04-03-2019 10:06 AM

89 jeep cherokee tailgate strut keeps poping off
 
My rear lift struts which are in good shape , one side at the top keeps poping off now and then ,could it be the ball on the tailgate is worn out some ? can you buy new ones and how do they come out

Batman33165 04-03-2019 01:12 PM

man i had the same issue except one side ending up ripping the ball off the inside. I ended up using my 5th wheel to hold my tailgate till i had an idea how i was going to get the replacement on.

I had to end up cutting the remaining base out and purchased some universal ball mounts, i believe my profile has pictures of it. The hardest part is getting that base to come out. I believe i can get you the part number for the ball mounts from NAPA that i used.

Good luck

Batman33165 04-03-2019 01:20 PM

NAPA part number 735-1898 times 2 and 6 self tap screws

gat 04-03-2019 05:47 PM

Please post a close and far photograph.

DFlintstone 04-03-2019 05:57 PM

Does yours have a paperclip sized clip that fits through two holes holding the ball in? (look close. It goes through then folds it's horseshoe "C-clip" around it). If so remove it and see if it's bent. Also see if it has worn a slot in the ball. In 20 years of dealing with that I have much more than I can share here except that going to the junk yard, (hail Mary), with rare exception salvation is there.

Do take care and be gentile.... if you twist the nut in the frame loose messing with the ball, or brake it's stud, it gets way more interesting.

fb97xj1 04-03-2019 06:29 PM


blazer 2008 04-03-2019 07:58 PM

yes it has the c-clip inside the strut

DFlintstone 04-03-2019 08:02 PM

Excellent vid FB. I didn't watch the whole thing....I've never used the words "easy , or simple", though!

blazer 2008 04-09-2019 07:15 PM


Originally Posted by Batman33165 (Post 3549836)
man i had the same issue except one side ending up ripping the ball off the inside. I ended up using my 5th wheel to hold my tailgate till i had an idea how i was going to get the replacement on.

I had to end up cutting the remaining base out and purchased some universal ball mounts, i believe my profile has pictures of it. The hardest part is getting that base to come out. I believe i can get you the part number for the ball mounts from NAPA that i used.

Good luck

I couldn,t find it in your profile

Batman33165 04-10-2019 09:29 AM

NAPA part number 735-1898 times 2 and 6 self tap screws

Towards the end of page 12 shows a picture or two of the set up


All times are GMT -5. The time now is 01:36 PM.


© 2024 MH Sub I, LLC dba Internet Brands