Pete Shafer

I've checked all fuses, bulbs and sockets, with no luck.

mikesignal

did you check the fuses with a meter? sometimes they can look good but test bad

Pete Shafer

Yes, everything checked with a meter.

mikesignal

hmm..not sure if there is a relay in the circuit or not.That could have failed;relay contacts stuck...as always, a diagram would be helpful, trace voltage from the source, see where you lose it...sorry I could not be more helpful

Deltatech

Check the grounds.

Pete Shafer

Found and corrected the issues. There were broken wires in the harness that goes through the top of the lift gate. Specifically, the high center stop light and the license plate light were shorting against the body. This kept blowing fuses 7 & 23. Also, had to replace the stop light switch and the combination sig/hazard flasher. Everything is up and running.

Thanks to all for the recommendations.

Turbo X_J

Thanks for the update man, some peeps never close their threads.