2 inch lift
#1
Newbie
Thread Starter
Join Date: Aug 2009
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
2 inch lift
What is the best way to about 2 inches of lift. Would like something with rear springs if not to much. Because the rear sags now so if I do shakles I don't think it will sit level. This will be used for a hunting minor and light offroad use. Any assistance would be greatly appreciated. Also what size tire would I be able to run with this?
#2
Junior Member
Join Date: Aug 2009
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 2.5L 4 cyl
FWIW, I'm considering this kit: http://www.rubiconexpress.com/Suspen...px?part=RE6160
I found my rear springs a bit "saggy" after toting home so garden rock the other day... It seems to be a very good value and straightforward to install.
Cheers.
I found my rear springs a bit "saggy" after toting home so garden rock the other day... It seems to be a very good value and straightforward to install.
Cheers.
#3
Newbie
Join Date: Nov 2008
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6 'high output'
I would try and find a set of new xj stock springs and then throw in a set of shackles and build a set of these http://www.madxj.com/MADXJ/technical...oilSpacers.htm
easy and cheap!
easy and cheap!
#6
Seasoned Member
Join Date: Jan 2009
Location: Middle Tennessee
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6
#7
Junior Member
Join Date: Sep 2009
Location: Englandshire
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
AAL's will make the ride very harsh, especialy on sagged leaves.
Bite the bullit, and put new springs on, and some 2" shackles while you are under there.
Bite the bullit, and put new springs on, and some 2" shackles while you are under there.
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
03-04-2023 01:10 PM
ARCH4NGEL_II
Modified XJ Cherokee Tech
0
09-07-2015 12:18 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)