ToasterOnWheels

http://www.naxja.org/forum/showthread.php?t=931690

I've been digging on here for a while trying to avoid posting something that has been asked a million times. Still the best guide I found doesn't mention how to get the washer fluid container removed. I only see to bolts but it's still being held down blocking me from getting to the blower motor.

Can someone confirm if there is an easier way and if I really have to remove the blower motor?

The link at the top is the guide I'm using. Thanks

ToasterOnWheels

What I've done so far

Firestorm500

I've never had mine out, but there probably is a third bolt underneath still holding it.

ToasterOnWheels

Well I got the washer fluid tank out of the way it was a third bolt shared with the fuse box. Now everything is removed and I'm just waiting to have the ac discharged so I can remove the ac lines and finish pulling the box out to replace the heater core.

ToasterOnWheels

Heater core is done. I don't ever want to do that again.

darp

Hi Toaster, I have 96 and before doing it want to know where the core is. Is in in that black box with yellow tag?

I have used your pic in new post https://www.cherokeeforum.com/f2/mys...1996-a-214995/

Some info indicates its parallel to firewall over trans hump.

Thanks

freegdr

Future reference.....

http://www.naxja.org/forum/showthrea...%20replacement

darp

Freegdr, That shows it over the trans hump parallel, and it matches one of the core types shown for 96XJ.

Do you or anyone else by chance know if 1996 is the same as that, that is a 1989.

Thanks!

freegdr

Problem with 96 is transition year....look here....http://jeepair.com/heater-cores.html