1996 Cherokee: replacing front control arms with tubular CAs
#1
Junior Member
Thread Starter
Join Date: Jun 2016
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
1996 Cherokee: replacing front control arms with tubular CAs
I have a 1996 Cherokee with 4x4. It has the Dana 30 up front,and everything is stock. I need to replace the front control arm bushings,and I figure I'll just go with some tubular arms while I'm taking it all apart.
I want to know what you recommend as a replacement. I want to keep all the stock dimensions,so I'd HIGHLY prefer to not get adjustable ones,and I'd like to keep the same hardware sizes. I hope this isn't too demanding,so let me know what you think I should go with.
I want to know what you recommend as a replacement. I want to keep all the stock dimensions,so I'd HIGHLY prefer to not get adjustable ones,and I'd like to keep the same hardware sizes. I hope this isn't too demanding,so let me know what you think I should go with.
Thread
Thread Starter
Forum
Replies
Last Post
Xj'd
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
07-17-2016 07:45 AM
brittmeister
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
04-01-2016 08:53 AM
jherrin215
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
10-03-2007 08:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)