WTB: Axle parts
10-19-2011, 09:03 PM
#1
CF Veteran
Thread Starter
Join Date: Oct 2008
Location: Hell, CA
Posts: 2,127
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L I6
WTB: Axle parts
Few things I am looking for. Will needs these to my door by no later than Nov 4. Sooner, preferably.
ZJ rear disc setup, hoping to swap these on to a 8.25. Seen the writeups and know will have to slightly modify.
Otherwise, new brake hardware.. shoes, springs etc.
4.10 gears for D30 hp (rev. rotation) /carrier/master kit
Possibly 8.25 lunchbox locker.
Also, U-bolts for C8.25
My zip is 93444 Give me your best offers. I have a couple on the gears/carrier.
I live in a small area that does not have many XJ's in the yards. So please no "Find a 4cyl xj with 4.10s" Thanks.
ZJ rear disc setup, hoping to swap these on to a 8.25. Seen the writeups and know will have to slightly modify.
Otherwise, new brake hardware.. shoes, springs etc.
4.10 gears for D30 hp (rev. rotation) /carrier/master kit
Possibly 8.25 lunchbox locker.
Also, U-bolts for C8.25
My zip is 93444 Give me your best offers. I have a couple on the gears/carrier.
I live in a small area that does not have many XJ's in the yards. So please no "Find a 4cyl xj with 4.10s" Thanks.
Last edited by Metmknice; 10-19-2011 at 09:05 PM.
10-19-2011, 09:56 PM
#3
CF Veteran
Thread Starter
Join Date: Oct 2008
Location: Hell, CA
Posts: 2,127
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L I6
Yes I have a bit. But I am on a budget, and the things like lockers are not a big priority for me right now.
I am going to be swapping in a 98 D30 HP and a 29-spl C8.25 (already geared with 4.10s) in my 89 XJ. So am looking for gears/carrier to install in the D30. Used is fine as long as it works.
Unless there are vendors that have a payment plan, then at this point in time my budget is pretty small.
I am going to be swapping in a 98 D30 HP and a 29-spl C8.25 (already geared with 4.10s) in my 89 XJ. So am looking for gears/carrier to install in the D30. Used is fine as long as it works.
Unless there are vendors that have a payment plan, then at this point in time my budget is pretty small.
10-20-2011, 12:02 PM
#4
Seasoned Member
Join Date: Jan 2011
Location: Sacramento, CA
Posts: 430
Likes: 0
Received 2 Likes
on
2 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I have a 8.25 disc brake set up that I was going to swap onto my Cherokee but decided to sell it before I could. Mine is from a Jeep Liberty 8.25 which means the back plates don't need to be mpbified or the ebrake lines. This would be a direct swap.
Hit me up if you're interested.
Will
Hit me up if you're interested.
Will
10-24-2011, 08:42 AM
#6
Former Sponsor
Join Date: Mar 2011
Location: Mount Aukum
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Thread
Thread Starter
Forum
Replies
Last Post
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 05:31 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)