need stock control arms
#1
Newbie
Thread Starter
Join Date: Jun 2011
Location: Burlington, IN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
need stock control arms
I need some stock front lower control arms, or at least one. I am trying to eliminate a vibe issue before i install a lift and I think a control arm is the issue. Looking for one really cheap. JY around me tend to cut them when removing the front ends
#2
Senior Member
Join Date: Nov 2010
Location: zephyrhills fl
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0 I6
I have two stock lowers. The bushings are bad but you can have then if you just pay to ship. Shoot me a pm and I'll get back with you latter tonight.
Brandon
Brandon
#4
CF Veteran
Join Date: Aug 2010
Location: Carlisle, PA
Posts: 1,678
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: Inline 6
i have stock LCA, just got RC X-flex LCA that I am about to put on. let me know if the other two dont work out for you. they are from a 2000
#6
Newbie
Thread Starter
Join Date: Jun 2011
Location: Burlington, IN
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
sorry BTM as it says I am a newbie and I guess I dont' know how to get your info to send you a PM. I would prefer to have one with good bushings anyway so I don't add another question mark to my attempt to get rid of this vibe.
Trending Topics
#10
Do a little research and check if what I got will work for you. I have both front lowers and all four rears for a 98 ZJ with a Dana 30 front. I don't think they are different between what you got and what I got as all the steering is the same too. Anyway look into it and let me know. I'm thinking $20 plus shipping and all bushings are fine.
Thread
Thread Starter
Forum
Replies
Last Post
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
03-08-2016 11:33 AM
JPXJMOAB
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-06-2015 07:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)