Measurments of Stock 8.25 leafs....
#1
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Gilman, IL
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Measurments of Stock 8.25 leafs....
Hey all, getting some custom made blocks with pinion angle milled in, so i'm looking for a few measurments, first is the stud coming out of the leaf pack, i need to know the size of it. And second is the size of the cavity on the leaf perch that the stud goes into on the axle., should be the same relative size, but need specifics to get parts milled correctly. Third is the length and width of the perch. I could tear down xj now, but it is a dd, and i work mon-fri, so if anyone has the parts laying around and could shoot me some #'s, that would be beneficial!! Thanks in advance, Joey
#3
CF Veteran
Join Date: Aug 2010
Location: Carlisle, PA
Posts: 1,678
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: Inline 6
Hey all, getting some custom made blocks with pinion angle milled in, so i'm looking for a few measurments, first is the stud coming out of the leaf pack, i need to know the size of it. And second is the size of the cavity on the leaf perch that the stud goes into on the axle., should be the same relative size, but need specifics to get parts milled correctly. Third is the length and width of the perch. I could tear down xj now, but it is a dd, and i work mon-fri, so if anyone has the parts laying around and could shoot me some #'s, that would be beneficial!! Thanks in advance, Joey
#4
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Gilman, IL
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Thread
Thread Starter
Forum
Replies
Last Post
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-10-2015 09:21 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)