HP 4.10s
#1
Junior Member
Thread Starter
Join Date: Jul 2010
Location: Wisconsin
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
HP 4.10s
Anybody have and 4.10s for a high pinion D30??? Im in WI 54729 if so i would like to know what it would be shipped please. Thanks
#3
Seasoned Member
Join Date: Apr 2009
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
I will as soon as I get my 4.56 gears installed. Gears should be here today-
I am in NW IN but I have never done gears before so this will probably take me some time unless I find some help.
Want to come to IN and help do gears? I'll give you my D30 4.10s. :-)
I am in NW IN but I have never done gears before so this will probably take me some time unless I find some help.
Want to come to IN and help do gears? I'll give you my D30 4.10s. :-)
#4
Junior Member
Thread Starter
Join Date: Jul 2010
Location: Wisconsin
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Dang if you were closer i would haha but if you get help hit me up i need gears bad haha
#5
Seasoned Member
Join Date: Apr 2009
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
I am only 15 minutes into IN... Where in WI are you?
I am buying a dial guage and magnetic base tonight, got my gears yesterday in the mail. I have a stack of 4 different write-ups printed out, so I am going to tackle this myself this weekend, although I will be doing the 8.8 first. It is not yet installed and if I get in over my head I have someone who can help me but he is a 2 hr drive away. My biggest problem is the lack of a press, although I do have access to one at work, that will be a PITA. I am tempted to order a set of "setup bearings"- they are about the same price as a set of normal bearings and I will not have to bore them out myself with a dremmel tool.
~Kevin
I am buying a dial guage and magnetic base tonight, got my gears yesterday in the mail. I have a stack of 4 different write-ups printed out, so I am going to tackle this myself this weekend, although I will be doing the 8.8 first. It is not yet installed and if I get in over my head I have someone who can help me but he is a 2 hr drive away. My biggest problem is the lack of a press, although I do have access to one at work, that will be a PITA. I am tempted to order a set of "setup bearings"- they are about the same price as a set of normal bearings and I will not have to bore them out myself with a dremmel tool.
~Kevin
#6
Junior Member
Thread Starter
Join Date: Jul 2010
Location: Wisconsin
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I am only 15 minutes into IN... Where in WI are you?
I am buying a dial guage and magnetic base tonight, got my gears yesterday in the mail. I have a stack of 4 different write-ups printed out, so I am going to tackle this myself this weekend, although I will be doing the 8.8 first. It is not yet installed and if I get in over my head I have someone who can help me but he is a 2 hr drive away. My biggest problem is the lack of a press, although I do have access to one at work, that will be a PITA. I am tempted to order a set of "setup bearings"- they are about the same price as a set of normal bearings and I will not have to bore them out myself with a dremmel tool.
~Kevin
I am buying a dial guage and magnetic base tonight, got my gears yesterday in the mail. I have a stack of 4 different write-ups printed out, so I am going to tackle this myself this weekend, although I will be doing the 8.8 first. It is not yet installed and if I get in over my head I have someone who can help me but he is a 2 hr drive away. My biggest problem is the lack of a press, although I do have access to one at work, that will be a PITA. I am tempted to order a set of "setup bearings"- they are about the same price as a set of normal bearings and I will not have to bore them out myself with a dremmel tool.
~Kevin
I am in north central kinda im about 7 hours of so from chicago.
#7
Seasoned Member
Join Date: Apr 2009
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
Well once I get the 4.10s out of the front I will hit you up and see if you are still looking. May be 2-3 weeks though. I can ship them, as I happen to have a couple nice Motive gear boxes... :-)
~K
~K
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Jul 2010
Location: Wisconsin
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
#9
Seasoned Member
Join Date: Apr 2009
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
HP D30 reverse cut 4.10 gears, stock on my 1994 5speed 4 banger YJ. Will have a matching set of Turdy Five 4.10s too, along with complete YJ turdy five. LOL!
#11
Junior Member
Thread Starter
Join Date: Jul 2010
Location: Wisconsin
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)