DANA front and rear
I am in need of new axles, I'm prefferably looking for DANAs and not chrysler. If anyone has a decent set let me know. Thanks all.
|
a stock chrysler rear is way better than a stock dana rear...so you would need a dana 30 front might want to specify if you want low pinion or high pinion and what spline counts/ gear ratios/ etc. etc.
|
Originally Posted by mcguyver_xj
(Post 1615932)
a stock chrysler rear is way better than a stock dana rear...so you would need a dana 30 front might want to specify if you want low pinion or high pinion and what spline counts/ gear ratios/ etc. etc.
|
Originally Posted by meancherokee
so a stock 8.25 with 27spline shafts is better then a stock d44 with 30spline shafts? |
I have a stock xj 44 3.55 gears. Somewhat of a rust bucket tho. Hell its 20 plus yrs old. Needs new seals, new diff cover, has no brakes on it. Just a good housing and the 30 spline shafts and chunk. Make me an offer. Pickup only from Owensboro ky 42303.
|
Originally Posted by ChiefSpoonS
(Post 1616009)
No but a stock 8.25 29 spine is just as good.
|
To the OP,
You might want to consider adding your location to your post. |
All times are GMT -5. The time now is 07:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands