bushwacker replacement hardware!!!
#1
CF Veteran
Thread Starter
Join Date: Jan 2011
Location: aurora colorado
Posts: 2,550
Likes: 0
Received 1 Like
on
1 Post
Year: 1991
Model: Cherokee
Engine: 4.0
bushwacker replacement hardware!!!
i need the replacement hardware kit for bushwackers!!! does anybody have this or anything that will work?! i only need like ten bolts and rubber things but anything helps!!!! let me know
1111 this is an example!!! http://www.summitracing.com/parts/BSH-PK1-10911/
1111 this is an example!!! http://www.summitracing.com/parts/BSH-PK1-10911/
#3
Senior Member
Join Date: May 2009
Location: dingmans Ferry, PA
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4.0
when i had my bushwackers....i went to home depot for the screws....and i found the washer....and you probably stack a few rubber washers together
#4
CF Veteran
Thread Starter
Join Date: Jan 2011
Location: aurora colorado
Posts: 2,550
Likes: 0
Received 1 Like
on
1 Post
Year: 1991
Model: Cherokee
Engine: 4.0
Originally Posted by tommyxj2000
when i had my bushwackers....i went to home depot for the screws....and i found the washer....and you probably stack a few rubber washers together
#6
Seasoned Member
Join Date: Feb 2011
Location: pa
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98
Model: Cherokee
Engine: 4.0
Go to your local hardware store and you can pick up nylon spacers to fill the gap and then just match up your bolts, I just got self tapping roofing screws with the larger head and rubber seal at the bottom worked well looks good and I can keep a few in the center concel with a
Nut driver for when I pop one off on the trail
Nut driver for when I pop one off on the trail
Trending Topics
#8
Seasoned Member
Join Date: Feb 2011
Location: pa
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98
Model: Cherokee
Engine: 4.0
No I can't say that i do because I no longer have any of the original bolts holding my bw's on I use self tapping roofing screws with a huge cap so if I do rub really hard on a trail it'll just pull the self tapper out befor breaking my flair :learned the hard way:
#10
Junior Member
Join Date: May 2010
Location: Missoula, MT
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: I6
I've got all that, except only 22 of the torx bolts D: and I've never received washers with either set of my bushwackers so idk about that.... but I can do it for $10 shipped if ya want.
Thread
Thread Starter
Forum
Replies
Last Post
SilverSwamper
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
15
09-11-2016 01:05 PM
Zeke P. Lucas
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-30-2015 05:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)