rebuilt/restored car hauler and 37x12.50r16.5 MT's and H1 wheels
#1
MJ>XJ
Thread Starter
Join Date: Mar 2009
Location: Griffin, G.A.
Posts: 17,836
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1990
Model: Comanche
Engine: 4.0 I6
rebuilt/restored car hauler and 37x12.50r16.5 MT's and H1 wheels
took the trailer all apart and put it back together like new! cut off any old metal that didnt need to be there... wire wheeled the whole thing down..... rustoleum bed lined the whole trailer inside and out... welded on new front jack... welded on new hand crank winch... rewired entire trailer and installed new lights that are surrounded by pipe so cant be damaged... all new safety chains with stainless hardware to truck end... trailers built with 6in channel and is beef... has mobile home axles and parts are regularly available and both axles do have brakes but i havent pulled them apart yet or wired them up... entire deck was replaced and i still gotta bolt them down so thats how new it is... i did haul my comanche to scrap today on it with no problems... K5 blazers getting loaded tomorrow... two tires are like new and im gonna buy two more for it new before it sells... im gonna get the exact measurements tomorrow and the tires ordered but its dark now its roughly 6.5x13.5... theres about a 12in extension over the front V part for longer vehicles... i measured my 03 cummins crew cab long bed and even it would fit on the trailer so i dont think your gonna have anything to long... it also DOES NOT have fender covers so your rig can pull over the tires if need be...
Its gonna be awhile before i have another rig of any sort so i have no need for it now... schools gonna cost alot the next two years... ill buy another one later... asking $1500 firm for it since its not really hurting anything... any other questions just ask! ill try and grab some pics tomorrow as well...
H1 two piece steel wheels 12 stud style with like new 37's as seen on pirate that can be built with any lug pattern and several back spacing choices... $600
Travis
678-588-6661
Its gonna be awhile before i have another rig of any sort so i have no need for it now... schools gonna cost alot the next two years... ill buy another one later... asking $1500 firm for it since its not really hurting anything... any other questions just ask! ill try and grab some pics tomorrow as well...
H1 two piece steel wheels 12 stud style with like new 37's as seen on pirate that can be built with any lug pattern and several back spacing choices... $600
Travis
678-588-6661
#3
MJ>XJ
Thread Starter
Join Date: Mar 2009
Location: Griffin, G.A.
Posts: 17,836
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1990
Model: Comanche
Engine: 4.0 I6
yeah im workin on it... gotta wait till daylight though... gets dark at 5pm when its rainey right now... 6 when clear skys... gonna try tomorrow...
#6
MJ>XJ
Thread Starter
Join Date: Mar 2009
Location: Griffin, G.A.
Posts: 17,836
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1990
Model: Comanche
Engine: 4.0 I6
yes H1 wheels are the only ones i know that can be double beadlocked (tires pinched on outside and inside and can be aired all the way out)... there is a PVC insert that fits inside the tires... heres what they look like and a place you can buy the rock rings, PVC inserts, and re-centers... there frickin awesome...
www.trailworthyfab.com
www.trailworthyfab.com
Thread
Thread Starter
Forum
Replies
Last Post
shotseven
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-06-2015 03:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)