MJ/XJ Steering Box Brace- Indiana
04-17-2011, 09:25 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2010
Location: East Central Indiana
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989 Comanche
Model: Cherokee
Engine: 4.0L
MJ/XJ Steering Box Brace- Indiana
NEW MJ/XJ Steering Box Brace. A full set of installation instructions comes with brace. Grade 5 bolts are provided. All metal was sandblasted prior to several coats of Hammertone black paint being applied. $40.00 + shipping.
Thanks!
Thanks!
04-17-2011, 01:34 PM
#4
Junior Member
Thread Starter
Join Date: Dec 2010
Location: East Central Indiana
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989 Comanche
Model: Cherokee
Engine: 4.0L
Hand-made using saw, mill, welder, etc. A company made unit was used for reference ONLY. Made a few extra if anyone is interested.
Brace uses the threaded hole in the rear. I propose you drill it out for the new 3/8" bolt and nut.
As for the front hole, you might need to modify my frame bracket to allow new bolt and nut for trac bar brace to still be installed. Due to the number of years produced and production variations of the Jeep® XJ Cherokee and MJ Comanche, some modifications to the vehicles sub frame may be needed for proper installation.
Hope this helps.
Brace uses the threaded hole in the rear. I propose you drill it out for the new 3/8" bolt and nut.
As for the front hole, you might need to modify my frame bracket to allow new bolt and nut for trac bar brace to still be installed. Due to the number of years produced and production variations of the Jeep® XJ Cherokee and MJ Comanche, some modifications to the vehicles sub frame may be needed for proper installation.
Hope this helps.
Last edited by cjbilly; 04-17-2011 at 06:59 PM.
04-19-2011, 10:46 AM
#6
Junior Member
Thread Starter
Join Date: Dec 2010
Location: East Central Indiana
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989 Comanche
Model: Cherokee
Engine: 4.0L
04-19-2011, 07:25 PM
#7
Seasoned Member
Join Date: Feb 2011
Location: pa
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98
Model: Cherokee
Engine: 4.0
No thanks buf I can weld up my own piece of pipe and hunk of angle for that price just trying to help you out and get some of em off your hands..
Trending Topics
04-26-2011, 10:26 PM
#9
Junior Member
Thread Starter
Join Date: Dec 2010
Location: East Central Indiana
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989 Comanche
Model: Cherokee
Engine: 4.0L
04-26-2011, 10:28 PM
#10
Junior Member
Thread Starter
Join Date: Dec 2010
Location: East Central Indiana
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989 Comanche
Model: Cherokee
Engine: 4.0L
Thread
Thread Starter
Forum
Replies
Last Post
Dyno89
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-13-2015 02:23 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)