Ruffstuff XJ Unirail Channel Reinforcement
These have been a long time coming but were well worth the wait! Perfect for a Crawler or Jeepspeed, our version of the Cherokee Unirail Reinforcement plates.
http://www.ruffstuffspecialties.com/...0w%20cudjo.jpg They are certainly as well made as any of the rest but have some very definate improvements over them also. First off they are 3/16" thick, I tried them in 10 gauge but they just felt lite. Then, where the others stop the Cap at the floor creating a very long stress riser on the very weak floorboards, ours continue 1" onto the floor itself spreading out the load further and increasing the lifespan of the body. Another of the unique ways these are made is the front and rear risers following the Unirail into the wheelwells, the rear dosen't need too much but the front goes up 9" into the front fender at the angle of the rail after it turns into the well towards the motor. http://www.ruffstuffspecialties.com/...0by%20side.jpg When you install these is the perfect time to create your own longarm kit and we have the brackets for it! If you are sticking with stock either cutoff the leading 9" or remove and replace your link bracket after you install the rails. The last thing these do that others have chosen to ignore is to make adding a skidplate easy. http://www.ruffstuffspecialties.com/...ing%20nuts.jpg These come built in with 4 additional threaded holes for skid attachment! The holes are there and the weldable nuts come with it but if you don't want them use it as a plug weld hole, to use the nuts you will use a 3/4" hole saw to fit the nut into the existing channel. These are shipped to you flat and very easy to install, first you weld the flat area around the crossmember and then use a jack to custom fit the bends, it is extremely easy to do! If we pre-bend the large end the shipping cost jumps nearly $20 because the box gets much bigger. We charge $10 to ship these within the lower 48 so we are eating the majority of the shipping cost already. |
very cool product!!!
|
By flat, for shipping, do you mean the ends are not bent? Or do you mean none of the bends are there? Just a flat bar with holes?
|
Check their website. They ship flat, you weld the center section and bend them into place with a floor jack. These bad boys are on my wishlist.
|
Ruffstuff XJ Unirail Channel Reinforcement
time to beef it up !!
|
This doesn't belong in OEM Tech...
|
Ruffstuff XJ Unirail Channel Reinforcement
:flag:REAL JEEPS HAVE UNIBODIES:flag:
|
how much they runnin for a set pm me
|
Ruffstuff XJ Unirail Channel Reinforcement
Time to do it right.. These will ship for $17.00 to the lower 48 states.
|
Ruffstuff XJ Unirail Channel Reinforcement....
First thing that should be done to every XJ !!
|
Can I come by and check out your product selection locally and purchase in person?
|
They are $17 shiped for the set
|
And if you already have a long arm?
|
Originally Posted by NickH
And if you already have a long arm?
|
Ruffstuff XJ Unirail Channel Reinforcement
The best way to toughen up that XJ
|
All times are GMT -5. The time now is 07:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands