Napier Precision - Picture Thread
CF Veteran
Joined: Jul 2012
Posts: 4,104
Likes: 2
From: San Antonio, TX
Year: 1996
Model: Cherokee
Engine: 4.0L
CF Veteran
Joined: Jul 2011
Posts: 2,164
Likes: 1
From: Warren, Pa
Year: 97
Model: Cherokee
Engine: 4.0L
Thanks for the question. The rear opening will always work unless the wheel tub has been totally re-sized, which is unusual. The front wheel opening can be cut too big to fit our fender flares. Take a look at the install guide for our V2 Fender flares then look through the online write up on BC4x4.com. If the information there doesn't answer the question then feel free to post pics here or email them to me at the link in my sig.
Here's a link to a PDF of the Installation Guides on our website: Napier Precision Install Guides
Online installation write up by BC4x4.Com: Project XJ
Thanks, Doug
CF Veteran
Joined: Nov 2011
Posts: 3,603
Likes: 3
From: SLC, Utah
Year: 1999
Model: Cherokee
Engine: 4.0L
Thread Starter
Seasoned Member
Joined: Nov 2011
Posts: 375
Likes: 3
From: Louisville KY area
Year: 1998
Model: Cherokee
Engine: 4.0
Napier Precision Products V2 Fender Flares have perfect coverage for most oversized tires. The V2 Flares were designed to cover 12.5" wide tires perfectly!
Want 10% off? Towards the end of the checkout process on our website enter the code: CF10
Want 10% off? Towards the end of the checkout process on our website enter the code: CF10
Thread Starter
Seasoned Member
Joined: Nov 2011
Posts: 375
Likes: 3
From: Louisville KY area
Year: 1998
Model: Cherokee
Engine: 4.0
You already know that Napier Precision Products V2 Fender Flares look awesome but what makes our Flares so much higher quality?
V2 Fender Flare Features:
- Made from textured scratch resistant ABS thermoplastic. The same material as other brands use but significantly THICKER! (At least twice as thick as the BW knockoffs we've seen!) Higher quality and tougher at a competitive price.
- Extend out from the Jeep around 3.25" which is perfect to cover most common over sized tire/wheel setups that we run. Covers the tires but doesn't make your XJ as wide as a bus.
- Blend really well with the body lines of the Jeep Cherokee. We designed the V2 Flares on an XJ running 10.5"-12.5" wide tires with aftermarket wheels so they look nearly OEM.
- V2 Fender Flares optimize both the front and rear wheel well openings to allow for larger tires and maximum articulation off road. See the Install Guides linked on our website.
- Warranty: V2 Fender Flares aren't indestructible and while we don't have a formal written warranty, the V2 Flares get broken so seldom that we usually replace them at 50% off for verified previous customers.
Armor and other stuff
- V2 Fender Flares are available for XJs that have the lower rear quarter panel cut and folded up for increased ground clearance and departure angle. No one else makes fender flares for this modification!
- Rock Rails: Since V2 Flares don't wrap all the way down under the body it's a lot easier to mount rock rails.
- Snorkel info: Airflow snorkels, or any snorkel that mounts above the body line, will work with the V2 Fender Flares.
- Armor: During manufacturing, we can adjust the width of the fender flares to account for armor on the rear quarter panel. (Just let us know when placing your order!) The fender flares on the door & rear quarter panel line up a lot better and you don't have to do as much work to make them look perfect!
Plus, get 10% off. Towards the end of the checkout process on our website enter the code: CF10
V2 Fender Flare Features:
- Made from textured scratch resistant ABS thermoplastic. The same material as other brands use but significantly THICKER! (At least twice as thick as the BW knockoffs we've seen!) Higher quality and tougher at a competitive price.
- Extend out from the Jeep around 3.25" which is perfect to cover most common over sized tire/wheel setups that we run. Covers the tires but doesn't make your XJ as wide as a bus.
- Blend really well with the body lines of the Jeep Cherokee. We designed the V2 Flares on an XJ running 10.5"-12.5" wide tires with aftermarket wheels so they look nearly OEM.
- V2 Fender Flares optimize both the front and rear wheel well openings to allow for larger tires and maximum articulation off road. See the Install Guides linked on our website.
- Warranty: V2 Fender Flares aren't indestructible and while we don't have a formal written warranty, the V2 Flares get broken so seldom that we usually replace them at 50% off for verified previous customers.
Armor and other stuff
- V2 Fender Flares are available for XJs that have the lower rear quarter panel cut and folded up for increased ground clearance and departure angle. No one else makes fender flares for this modification!
- Rock Rails: Since V2 Flares don't wrap all the way down under the body it's a lot easier to mount rock rails.
- Snorkel info: Airflow snorkels, or any snorkel that mounts above the body line, will work with the V2 Fender Flares.
- Armor: During manufacturing, we can adjust the width of the fender flares to account for armor on the rear quarter panel. (Just let us know when placing your order!) The fender flares on the door & rear quarter panel line up a lot better and you don't have to do as much work to make them look perfect!
Plus, get 10% off. Towards the end of the checkout process on our website enter the code: CF10
Thread Starter
Seasoned Member
Joined: Nov 2011
Posts: 375
Likes: 3
From: Louisville KY area
Year: 1998
Model: Cherokee
Engine: 4.0
Napier Precision is the only manufacturer that offers fender flares for the popular Cut-N-Fold modification to the lower rear quarter panel. Look at how much more clearance the rear tire has on Chuck's XJ with our V2 Fender Flares!
Thread Starter
Seasoned Member
Joined: Nov 2011
Posts: 375
Likes: 3
From: Louisville KY area
Year: 1998
Model: Cherokee
Engine: 4.0
Our V2 QF Fender Flares on Dmack's armored XJ. We're the only ones that offer fender flares for XJs with the lower rear quarter panel folded under!
Thread Starter
Seasoned Member
Joined: Nov 2011
Posts: 375
Likes: 3
From: Louisville KY area
Year: 1998
Model: Cherokee
Engine: 4.0
This is just one of the many well built XJs out there with our V2 Pocket Flares!
Get 10% off. Towards the end of the checkout process on our website enter the discount code: CF10
Get 10% off. Towards the end of the checkout process on our website enter the discount code: CF10
Thread Starter
Seasoned Member
Joined: Nov 2011
Posts: 375
Likes: 3
From: Louisville KY area
Year: 1998
Model: Cherokee
Engine: 4.0
Our V2 Pocket Flares cover most 33" or 31" tire setups on typical backspaced wheels just about perfectly. That looks the best on XJs and provide off road protection from debris flying off the tires while letting the tires do their job too!
Photo Credit: Blaine on Cherokee Forum
Photo Credit: Blaine on Cherokee Forum
CF Veteran
Joined: Nov 2011
Posts: 3,603
Likes: 3
From: SLC, Utah
Year: 1999
Model: Cherokee
Engine: 4.0L
Some shots from a small run after a NPLD clean up at a local trail in the rain they kept my XJ mud free. With 10.50 wide tires and 8" wide wheels
Last edited by Tom95YJ; Sep 28, 2014 at 09:58 AM.
Thread Starter
Seasoned Member
Joined: Nov 2011
Posts: 375
Likes: 3
From: Louisville KY area
Year: 1998
Model: Cherokee
Engine: 4.0
Leon F posted these pics of his XJ with our V2 Fender Flares. He's got some good flex going on and his tires are working perfectly with the V2 Flares!
-----
-----
-----
-----
