The CavFab XJ 3 Link Reveal
Thread Starter
Sponsor
Joined: Apr 2016
Posts: 342
Likes: 6
From: Rising Fawn, Georgia
You feel that the cross member is strong enough with no gusseting or bracing on the inside? Or is there bracing in there? I don't see a picture of the inside of the cross-member. I would definitely feel more comfortable with something inside there since I've seen 1/4" wall 2x4 cross members shaped like a banana. lol I'd also like to see the back side of the LCA tabs to be boxed in and braced on both sides. Just some constructive criticism. I would like to see pics of the inside. Looks like a decent product.
I'll get more pictures up soon. We will box the lower link mounts in. We also will have optional plates to allow the cross member to tie into the side of the unibody
CF Veteran
Joined: Oct 2013
Posts: 7,378
Likes: 2
From: Miami, fl
Year: 1998
Model: Cherokee
Engine: 4.0
Question-
Can you make a 3 link for a 3-3.5" lift that doesn't involve stretching the front 1-1.5" forward?
I know the flex won't be the same without extra lift but I'd like to have the articulation of a 3-link with that size of lift...
Can you make a 3 link for a 3-3.5" lift that doesn't involve stretching the front 1-1.5" forward?
I know the flex won't be the same without extra lift but I'd like to have the articulation of a 3-link with that size of lift...
CF Veteran
Joined: Jan 2013
Posts: 19,219
Likes: 45
From: west chester, pa
Year: 1999
Engine: 4.0
I would like to know that too
Thread Starter
Sponsor
Joined: Apr 2016
Posts: 342
Likes: 6
From: Rising Fawn, Georgia
^^
Again, thanks for all the support guys!
Junior Member
Joined: Oct 2011
Posts: 48
Likes: 0
From: Winfield , MO
Year: 98
Model: Cherokee
Engine: 4.0
Now i wish i would've waited to order long arms.. Wanted true 3 link and heard the other guys' customer service wasn't up to par. Even tried contacting them about ordering and got no response so i went with iron rock's kit. Your kit looks great, would've definitely been a customer
Thread Starter
Sponsor
Joined: Apr 2016
Posts: 342
Likes: 6
From: Rising Fawn, Georgia
Now i wish i would've waited to order long arms.. Wanted true 3 link and heard the other guys' customer service wasn't up to par. Even tried contacting them about ordering and got no response so i went with iron rock's kit. Your kit looks great, would've definitely been a customer
Hey, im sure someone would buy those IRO arms
If you ever need us, we will be here
CF Veteran
Joined: Dec 2011
Posts: 1,777
Likes: 22
From: PA KOTUFU!
Year: 1998
Engine: 4.0L 162,000
Nice. Could you do the lowers axle side with the Currie joints also?
3/8" possible?
We have RK 3 link on one XJ and it works very well. But they no longer make this item.
Other XJ has TNT long Y arms. On this XJ we want to change it over to 3 link. I also like the ability to add 1-1.5" to front, mini-stretch.
3/8" possible?
We have RK 3 link on one XJ and it works very well. But they no longer make this item.
Other XJ has TNT long Y arms. On this XJ we want to change it over to 3 link. I also like the ability to add 1-1.5" to front, mini-stretch.
Last edited by CobraMarty; May 6, 2016 at 09:08 AM.
Thread Starter
Sponsor
Joined: Apr 2016
Posts: 342
Likes: 6
From: Rising Fawn, Georgia
Nice. Could you do the lowers axle side with the Currie joints also? 3/8" possible? We have RK 3 link on one XJ and it works very well. But they no longer make this item. Other XJ has TNT long Y arms. On this XJ we want to change it over to 3 link. I also like the ability to add 1-1.5" to front, mini-stretch.