CavFab Stage 1 Adjustable Upper Control Arms
2 Attachment(s)
This is a brand new design that we just released this week. After releasing our adjustable lower control arms we had tons of people ask for adjustable uppers at the same price point. We have developed the ONLY adjustable UCA on the market that uses a Heim joint at the unibody side that DOES NOT require welding. To do this we designed a proprietary 10mm high misalignment spacer which allows you to retain factory hardware...thus meaning these are 100% bolt on. Literally unbolt your factory arms and bolt these in. One thing we disliked about other UCAs available on the market was the lack of support between the fork mount and the tube itself...we have seen this fail first hand where the fork mount will literally break apart from the tube. To prevent this we designed a laser cut gusset that braces off the tube and directly into the fork mount. These are available for $129.99 or we have a package deal for Uppers AND Lowers for only $249.99 http://cavfab.com/CavFab-Jeep-XJ-TJ-...rms_p_228.html |
Direct bolt on adjustable UCAs with heim joints? Mmmmhm
You can buy these AND adjustable LCAS for only $249.99 for the set of 4! CavFab.com |
These have absolutely taken off. When we designed these we wanted to offer something better than a poly bushing without the need to redrill. We developed a proprietary 10mm misalignment spacer that allows you to install these as a direct replacement without any drilling. We are the ONLY company to offer adjustable upper control arms with Heim joints that do not require drilling.
Get yours at CavFab.com ! |
We have a few pair of these on the shelf in stock as of earlier today. These ship powder coated at no extra cost!
$129.99 for adjustable uppers! |
All times are GMT -5. The time now is 07:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands