When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I Hate to see that Cavfab is going in this direction with customer satisfaction. I met Donavon, seemed like a cool guy that loved what he does. Maybe local guys will have a better experience showing up at their door.
To be honest, I’m just happy they are putting the product on the table...
Discount or no discount i’ll end up buying it anyways but I’ll just wait for a holiday to score on the discount instead...
Vendor gone Bye Bye? No posts in 2018? What's up with skid?
I heard the forum parent host ramped up the fee's/requirements for vendors, so allot of smaller guys like Cav-Fab left the forum scene as a vendor. This happened over on CumminsForum. Most were simply gone one day. Got a hold of my EFI live tuner via email, and that's what he explained. Which is why now you only see big name store suppliers. morris4x4, ruffstuff, 4wd,offroad and their spam 10% off adds.
Some pics of my install, not done but going well.
Turns out my exhaust was getting in the way a little but just trimmed the cross member a hair and it fit fine.
got the cross member done, tapped a 1/2" tap in front of the 2 stock cross member holes, then the 3/4" holes for the side supports. Dull bits/step bits made the job harder. After what felt like wrestling with king kong I got it together. In hindsight I may have welded on the side supports. I didn't like the frame bolts close to the fuel and brake lines. Had to grind off a little part of the inner pinch seem to get the washer and bolt to fit. Frame stiffeners probably added to the distance. My first long arm install, no biggie.
03-19-2018, 02:19 PM
