Hey, I like my flare job too, it was very easy and inexpensive. That first cut is a little scary but you get over it. Let me know when you’re ready to cut, I’d be more than happy to help.
I ran 31’s for some time but I really enjoy my 33’s, big difference. It takes a bit but it will still wind up to 80mph on the flats. With the abuse I put this rig through, I was popping front u-joints with both the 31’s and 33’s. Solved the problem when I swapped out my 90 axle shafts that had the 260 u-joints for a set of 96 axle shafts with the 297 u-joints, $20 for both sides at a pick-n-pull. C-ya
