Mark this thread as Unsold
FS[MidAtl]: Parting out complete 1996 Jeep Cherokee 2-dr 2wd 4.0L HO 5-spd
#1
Member
Thread Starter
Join Date: Feb 2013
Location: Butner, NC
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Parting out complete 1996 Jeep Cherokee 2-dr 2wd 4.0L HO 5-spd
Everything will be going. It has a salvage title and has some structural damage that was poorly repaired. This Jeep is a prime example of when a welder and beer do not mix. I bought it for parts.It is not a repairable vehicle and is in pretty poor shape.
It is a 1996, has 200k miles on it but the engine runs awesome, idles smooth and drives great. It has a new clutch in it, but needed a master and slave so the guy stopped driving it.
Engine - complete with everything, throttle body to pan including accessories - $500 obo
Transmission with new clutch, AX-15 2wd - $250
PM me or email me for parts, I'll post prices and pics as I go through taking it apart.
It is a 1996, has 200k miles on it but the engine runs awesome, idles smooth and drives great. It has a new clutch in it, but needed a master and slave so the guy stopped driving it.
Engine - complete with everything, throttle body to pan including accessories - $500 obo
Transmission with new clutch, AX-15 2wd - $250
PM me or email me for parts, I'll post prices and pics as I go through taking it apart.
#2
Member
Thread Starter
Join Date: Feb 2013
Location: Butner, NC
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
First round of parts:
Third brake light with wires, a little faded - $5
Spare tire cover for interior, a little dirty - SOLD
Sunpro tach with wires, condition unknown - SOLD
Random seat that was bolted into the back. Pretty good shape except one tear in back. Think it is a universal RV seat or something, has belts built-in. $10
Rear window louvers, great shape - $30
Taillights, decent shape. A little dirty and the driver's side has some spiderwebbing in the lens. SOLD
Spare tire brace and hold-down - $10
Tow hooks, in good shape - $10
NAPA clutch slave, new - $25
Raybestos clutch master, new - $25
Jack and crank handle, might have the lug wrench too, if I do I'll throw it in. $15
Vinyl rear seat. Dirty and has a paint stain on it, only tiny tear in the rear where the seats meet and you can't see it when together. Would be good for a trail rig. $10
Complete header panel. Not in great shape. Nothing broken but the lenses have some webbing and there is white overspray everywhere. And the lenses and stuff have been put in with wood screws. $50 complete.
Third brake light with wires, a little faded - $5
Spare tire cover for interior, a little dirty - SOLD
Sunpro tach with wires, condition unknown - SOLD
Random seat that was bolted into the back. Pretty good shape except one tear in back. Think it is a universal RV seat or something, has belts built-in. $10
Rear window louvers, great shape - $30
Taillights, decent shape. A little dirty and the driver's side has some spiderwebbing in the lens. SOLD
Spare tire brace and hold-down - $10
Tow hooks, in good shape - $10
NAPA clutch slave, new - $25
Raybestos clutch master, new - $25
Jack and crank handle, might have the lug wrench too, if I do I'll throw it in. $15
Vinyl rear seat. Dirty and has a paint stain on it, only tiny tear in the rear where the seats meet and you can't see it when together. Would be good for a trail rig. $10
Complete header panel. Not in great shape. Nothing broken but the lenses have some webbing and there is white overspray everywhere. And the lenses and stuff have been put in with wood screws. $50 complete.
Last edited by 4Birdman; 03-08-2013 at 03:19 PM.
#7
Member
Thread Starter
Join Date: Feb 2013
Location: Butner, NC
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
More parts:
Cherokee badges, decent shape $20
HVAC controls, worked when removed $10
Cigarette light assembly with no internal light, lighter missing $5
Headlight wiring harness - $10
Gauges, lens cracked and a little dirty inside but worked fine. $20
Cherokee badges, decent shape $20
HVAC controls, worked when removed $10
Cigarette light assembly with no internal light, lighter missing $5
Headlight wiring harness - $10
Gauges, lens cracked and a little dirty inside but worked fine. $20
Trending Topics
#8
Member
Thread Starter
Join Date: Feb 2013
Location: Butner, NC
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Got some more work done, ripped a giant chunk out of my finger too. Ouch.
Electric radiator fan. The one mounted in front of the ps pump. $20
Upper radiator/core support, good shape with hood latch link - $10
Radiator, was working when removed - SOLD
Fuse box bracket - $5
Strange intake tube thing, not-so-CAI - $15
Radiator overflow, cap is missing and there is a hole through the threads where the PO had shoved a nail through it. Had some oddball cap that didn't fit so this was his solution to keeping it on. New cap should cover the holes when installed. $10
Manual driver's side rearview mirror with interior trim. Worked when removed, plastic is faded and dull. SOLD
Electric radiator fan. The one mounted in front of the ps pump. $20
Upper radiator/core support, good shape with hood latch link - $10
Radiator, was working when removed - SOLD
Fuse box bracket - $5
Strange intake tube thing, not-so-CAI - $15
Radiator overflow, cap is missing and there is a hole through the threads where the PO had shoved a nail through it. Had some oddball cap that didn't fit so this was his solution to keeping it on. New cap should cover the holes when installed. $10
Manual driver's side rearview mirror with interior trim. Worked when removed, plastic is faded and dull. SOLD
Last edited by 4Birdman; 03-11-2013 at 01:49 PM.
#10
Member
Thread Starter
Join Date: Feb 2013
Location: Butner, NC
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Let me verify that they are all working. The Jeep was wrecked and at least one of the doors was replaced, let me make sure they swapped lock cylinders.
#11
Member
Thread Starter
Join Date: Feb 2013
Location: Butner, NC
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Passenger side front fender with fender flare. Panel is straight except for where it bolts on down by the rocker. The previous owner welded it on by the wheel well, I had to cut it off. It still can be attached at one hole, though. The flare has had the studs welded to the fender so I just left it on there. $15
Driver's side front fender. It is straight with some minor damage down by the rocker. It was also welded on and I had to cut it off, but one bolt hole is there still. Good for a cheap replacement on a trail rig. $10
Driver's side fender flare, some nuts missing but hardware is there and the studs are not broken off. $10
Driver's side door. Manual windows, manual locks, fixed vent window. No door panel or mirror, just as it sits, comes with glass. Needs paint. $40
Driver's side front fender. It is straight with some minor damage down by the rocker. It was also welded on and I had to cut it off, but one bolt hole is there still. Good for a cheap replacement on a trail rig. $10
Driver's side fender flare, some nuts missing but hardware is there and the studs are not broken off. $10
Driver's side door. Manual windows, manual locks, fixed vent window. No door panel or mirror, just as it sits, comes with glass. Needs paint. $40
#12
Senior Member
Join Date: Dec 2011
Location: Riverside county
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89' soon to be
Model: Cherokee
Engine: 4.0 HO 167k miles
Looking for the interior trunk panels. Not the the hatch, just the sides with pillars(plillars in front and behind side glass). That make sense?
#14
Member
Thread Starter
Join Date: Feb 2013
Location: Butner, NC
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Juan, do you need the full sides or just the panels on the pillars? I have those pulled off already, they are a bit dirty but not broken or damaged. $25 shipped for both.
XJWerks, you mean the boot in the console or the boot where it goes through the floor? The console boot was torn, but I can probably get the floor piece out in one piece. $20 shipped for it. BTW, I'm originally from Bethlehem.
XJWerks, you mean the boot in the console or the boot where it goes through the floor? The console boot was torn, but I can probably get the floor piece out in one piece. $20 shipped for it. BTW, I'm originally from Bethlehem.
#15
CF Veteran
Join Date: Feb 2010
Location: Allentown, Pa
Posts: 3,869
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: 4.0L HO
Juan, do you need the full sides or just the panels on the pillars? I have those pulled off already, they are a bit dirty but not broken or damaged. $25 shipped for both.
XJWerks, you mean the boot in the console or the boot where it goes through the floor? The console boot was torn, but I can probably get the floor piece out in one piece. $20 shipped for it. BTW, I'm originally from Bethlehem.
XJWerks, you mean the boot in the console or the boot where it goes through the floor? The console boot was torn, but I can probably get the floor piece out in one piece. $20 shipped for it. BTW, I'm originally from Bethlehem.
I live right outside of Bethlehem in Fountain hill at the moment. Not many xj's around this area though.