[FS] Ultrasonically cleaned "upgrade" fuel injectors
#91
Junior Member
Join Date: Aug 2015
Location: SW MI Lake-effect snowbelt country
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 HO
sent a PM, but will mention it here too. I'd like to get a set for my 1996 4.0 if/when you have a set available. just let me know when/where/how much to send a PO MO.
Last edited by DWStiles; 08-16-2015 at 09:16 AM.
#92
Newbie
Join Date: Aug 2015
Location: Chesapeake VA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Year: 87,96,98,99
Model: Cherokee
Engine: 4.0
#93
CF Veteran
Thread Starter
Join Date: Jan 2009
Location: Baltimore, Maryland
Posts: 1,964
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1994 1993
Model: Cherokee
Engine: 4.0
Thanks for the continued replies but I have no "ultrasonically cleaned" injectors any longer. They were a bust. I think 30% of them were dead when I tested them after getting them back from being cleaned. I still clean, rebuild and sell occasional sets when I have the time but just rely on soaking and reverse flushing and visually checking the spray pattern.
#95
Newbie
Join Date: Sep 2012
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L
1996 Jeep Cherokee XJ 4.0L
I just finished up swapping out stock injectors for 703 injectors I purchased from Programbo. Installation went super smooth with no leaks, all injectors appear to be working great! I took my xj out for a test drive and it was rough, it didn't want to idle very well, almost shutting off. There was a strong smell of gasoline I believe, hard to pinpoint the smell. Check engine light came on with P0171: System Too Lean (Bank 1). After driving it for a day and cycling the engine on/off, it seems that the pcm computer got the mixture right and now my xj is running smooth as butter. Will report back if any issues ensue.
I highly recommend working with Programbo, shipping was quick and easy!
I just finished up swapping out stock injectors for 703 injectors I purchased from Programbo. Installation went super smooth with no leaks, all injectors appear to be working great! I took my xj out for a test drive and it was rough, it didn't want to idle very well, almost shutting off. There was a strong smell of gasoline I believe, hard to pinpoint the smell. Check engine light came on with P0171: System Too Lean (Bank 1). After driving it for a day and cycling the engine on/off, it seems that the pcm computer got the mixture right and now my xj is running smooth as butter. Will report back if any issues ensue.
I highly recommend working with Programbo, shipping was quick and easy!
#96
CF Veteran
Thread Starter
Join Date: Jan 2009
Location: Baltimore, Maryland
Posts: 1,964
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1994 1993
Model: Cherokee
Engine: 4.0
1996 Jeep Cherokee XJ 4.0L
I just finished up swapping out stock injectors for 703 injectors I purchased from Programbo. Installation went super smooth with no leaks, all injectors appear to be working great! I took my xj out for a test drive and it was rough, it didn't want to idle very well, almost shutting off. There was a strong smell of gasoline I believe, hard to pinpoint the smell. Check engine light came on with P0171: System Too Lean (Bank 1). After driving it for a day and cycling the engine on/off, it seems that the pcm computer got the mixture right and now my xj is running smooth as butter. Will report back if any issues ensue.
I highly recommend working with Programbo, shipping was quick and easy!
I just finished up swapping out stock injectors for 703 injectors I purchased from Programbo. Installation went super smooth with no leaks, all injectors appear to be working great! I took my xj out for a test drive and it was rough, it didn't want to idle very well, almost shutting off. There was a strong smell of gasoline I believe, hard to pinpoint the smell. Check engine light came on with P0171: System Too Lean (Bank 1). After driving it for a day and cycling the engine on/off, it seems that the pcm computer got the mixture right and now my xj is running smooth as butter. Will report back if any issues ensue.
I highly recommend working with Programbo, shipping was quick and easy!
#97
Member
Join Date: Aug 2012
Location: Denver, CO
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
A stock '96 would use the Neon 703 injectors for an upgrade. Here's a reprint of my earlier update:
Thanks for the continued replies but I have no "ultrasonically cleaned" injectors any longer. They were a bust. I think 30% of them were dead when I tested them after getting them back from being cleaned. I still clean, rebuild and sell occasional sets when I have the time but just rely on soaking and reverse flushing and visually checking the spray pattern.
Thanks for the continued replies but I have no "ultrasonically cleaned" injectors any longer. They were a bust. I think 30% of them were dead when I tested them after getting them back from being cleaned. I still clean, rebuild and sell occasional sets when I have the time but just rely on soaking and reverse flushing and visually checking the spray pattern.
#99
Senior Member
Join Date: Sep 2012
Location: Bel Air, MD
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994 and 1996
Model: Cherokee
#102
Newbie
Join Date: Aug 2015
Location: Kansas City
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L