Mark this thread as Unsold
[FS] 550 cord grab handle's
#1
Seasoned Member
Thread Starter
Join Date: Feb 2013
Location: North Las Vegas
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
550 cord grab handle's
i have made a grab handle for my xj to replace my plastic one that broke but i am going to make more to replace the other ones i am sending this feeler out to see if any one would like a set i can make them for the front and rear handle's and also for the back of the seats or almost any thing you could want and in any color my price would be $20 for two or a full set of front and rear $30 i have attached a pic of one that i made in the first pic i ran out of cord so it's not done it still needs one more layer to make it thicker for a more comfortable garb the one in the second pic has half of the last layer so you can see the difference. just replay or PM me to let me know if you would like a set or if you have any question's
front
12 inch long with 20 ft of 550
rear and head rest
11-12 inch long with 18-20 ft of 550
front
12 inch long with 20 ft of 550
rear and head rest
11-12 inch long with 18-20 ft of 550
Last edited by USAF richards; 10-14-2013 at 10:56 PM. Reason: adding pics
#2
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
i have made a grab handle for my xj to replace my plastic one that broke but i am going to make more to replace the other ones i am sending this feeler out to see if any one would like a set i can make them for the front and rear handle's and also for the back of the seats or almost any thing you could want and in any color my price would be $20 for two or a full set of front and rear $30 i have attached a pic of one that i made in the first pic i ran out of cord so it's not done it still needs one more layer to make it thicker for a more comfortable garb the one in the second pic has half of the last layer so you can see the difference. just replay or PM me to let me know if you would like a set or if you have any question's front 12 inch long with 20 ft of 550 rear and head rest 11-12 inch long with 18-20 ft of 550
#3
Seasoned Member
Thread Starter
Join Date: Feb 2013
Location: North Las Vegas
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
It would be the same I would just send two extra six inch pieces per handle to tie them on or for the front two you can screw in the front piece there by the visor if I remember right there is a bolt or screw there and you only have too tie the back part to the roll bar
#5
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
It would be the same I would just send two extra six inch pieces per handle to tie them on or for the front two you can screw in the front piece there by the visor if I remember right there is a bolt or screw there and you only have too tie the back part to the roll bar
#6
Seasoned Member
Thread Starter
Join Date: Feb 2013
Location: North Las Vegas
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Same price the only way I would ask more is if you or some one els wanted a longer one or I can also get 550 yhat has reflective strands in it and some that glow in the dark but those cost a little more to buy but even then I would just ask more to cover the cord
#7
Seasoned Member
Thread Starter
Join Date: Feb 2013
Location: North Las Vegas
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
After shipping I only make like 5 $ its just something I can do while the wife is gone and baby is sleeping and on the weekends to pass time thats quite im not trying to rip ppl off I have seen some ppl. Wanting like 50 to 70 on other forums
Trending Topics
#8
Seasoned Member
Thread Starter
Join Date: Feb 2013
Location: North Las Vegas
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
for the xj you can just use the screws from the plastic ones yes on the driver side you have to dill two holes in the top plastic panel since they dont have them on that side but there are two holes in the sheet so you would just have to line the holes up and get a self tap screw to fit the hole
#10
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
My buddy is very interested in a set of these for his tj. Where are you located, how can he pay you, and will you ship them? He wants them in fluorescent or lime or the brightest loudest green you have.
#11
Seasoned Member
Thread Starter
Join Date: Feb 2013
Location: North Las Vegas
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I am stationed in las vegas I will shipping is figured into the cost and I have a pay pal account that is the easiest way I can get a neon green just let me know if he wants any other color in it or just all green
#14
Seasoned Member
Thread Starter
Join Date: Feb 2013
Location: North Las Vegas
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
#15
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0