Mark this thread as Unsold
FS[MidWest]: 784s - Ultrasonically cleaned, all new hardware, nice set!
#21
Member
I have a set I pulled from the local JY. What would it cost to have them cleaned by you? I could cover shipping.
Give a guy a cincy discount! Im from West Chester, if you know where that is.
Give a guy a cincy discount! Im from West Chester, if you know where that is.
#23
Newbie
Join Date: Mar 2015
Location: Glen Ellyn, Illinois
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Just installed the set you sold me. Had to use a little elbow grease getting them in the fuel rail, but they work like a charm. I teamed them up with a 60mm throttle body and I'm loving the results. Thanks again!!
#26
Junior Member
Join Date: Nov 2015
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L I6 Power Tech Engine
Fit great in my stock fuel rail. Just used a bit of Vaseline. No issues. Most were perfectly clean. Some had a little residue here and there, but other than that they look LNIB. Thanks!
#27
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Cincinnati, Ohio
Posts: 539
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
No problem.
Sometimes they are a bear to get all of the way clean. Gotta remember these are coming out of 16-18 year old cars most of the time from a junk yard. I ultrasonically clean them then scrub them by hand with a tooth brush lol. They can be rough.
Glad you are happy though.
Sometimes they are a bear to get all of the way clean. Gotta remember these are coming out of 16-18 year old cars most of the time from a junk yard. I ultrasonically clean them then scrub them by hand with a tooth brush lol. They can be rough.
Glad you are happy though.