FS[SouthEast]: Disc brake conversion kit
#886
Hello! I am just looking for rear disc brake backing plates (rusted out) and whatever ebrake components you might have. I bought a 95 G. Cherokee with no ebrake parts inside the rotors. Help, and thanks!
#887
CF Veteran
Thread Starter
Go to the parts store & ask for a hardware kit & e brake shoes your Jeep. More importantly you will need these.....
http://www.google.com/imgres?imgurl=...act=mrc&uact=8
http://www.google.com/imgres?imgurl=...act=mrc&uact=8
#888
CF Veteran
Thread Starter
You'll need what the cable is attached to. I can get them for you if you can't find them locally.
#890
CF Veteran
Thread Starter
Yes. LOL.
All of the parts I sell I would use on my own Jeep. These are used parts & there is bound to be a bad caliper shipped but I have yet to be contacted by anyone stating so.
All of the parts I sell I would use on my own Jeep. These are used parts & there is bound to be a bad caliper shipped but I have yet to be contacted by anyone stating so.
#893
CF Veteran
Problem solved.
BD is right on when he says that this is a swap well worth doing! Want to say THANK YOU to BD for providing this service.
BD is right on when he says that this is a swap well worth doing! Want to say THANK YOU to BD for providing this service.
Last edited by EZEARL; 05-30-2016 at 09:41 AM.
#894
Junior Member
Join Date: Apr 2014
Location: Alabama
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
David...
I was very disappointed when you told me you were not going to replace the broken caliper that you vouched for when i purchased those axles from you. I started to walk on the deal when I saw the condition of the axles when we met.
Is your position still the same?
Please do the right thing and honor the deal we made.
I was very disappointed when you told me you were not going to replace the broken caliper that you vouched for when i purchased those axles from you. I started to walk on the deal when I saw the condition of the axles when we met.
Is your position still the same?
Please do the right thing and honor the deal we made.
Last edited by Hog Rush; 05-30-2016 at 06:18 PM.
#895
CF Veteran
Thread Starter
I asked you A YEAR AGO which side you needed & you still haven't given me a response. Also, I couldn't have shipped it to you without a address. A year & a half was WAY more than enough time for you to get me that information.
No one made you buy the axles. I drove 1/2 way to meet up with you & delivered a 3.55, non disconnect, HP 30 & 3.55, 29 spline 8.25 with a disc brake conversion kit installed for $600. I think you got a deal.
Good day, sir.
No one made you buy the axles. I drove 1/2 way to meet up with you & delivered a 3.55, non disconnect, HP 30 & 3.55, 29 spline 8.25 with a disc brake conversion kit installed for $600. I think you got a deal.
Good day, sir.
#896
Junior Member
Join Date: Apr 2014
Location: Alabama
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I asked you A YEAR AGO which side you needed & you still haven't given me a response. Also, I couldn't have shipped it to you without a address. A year & a half was WAY more than enough time for you to get me that information.
No one made you buy the axles. I drove 1/2 way to meet up with you & delivered a 3.55, non disconnect, HP 30 & 3.55, 29 spline 8.25 with a disc brake conversion kit installed for $600. I think you got a deal.
Good day, sir.
No one made you buy the axles. I drove 1/2 way to meet up with you & delivered a 3.55, non disconnect, HP 30 & 3.55, 29 spline 8.25 with a disc brake conversion kit installed for $600. I think you got a deal.
Good day, sir.
Just send the plate.
#897
CF Veteran
Join Date: Jul 2013
Location: Monett, MO.
Posts: 7,554
Likes: 0
Received 14 Likes
on
14 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
I asked you A YEAR AGO which side you needed & you still haven't given me a response. Also, I couldn't have shipped it to you without a address. A year & a half was WAY more than enough time for you to get me that information.
No one made you buy the axles. I drove 1/2 way to meet up with you & delivered a 3.55, non disconnect, HP 30 & 3.55, 29 spline 8.25 with a disc brake conversion kit installed for $600. I think you got a deal.
Good day, sir.
No one made you buy the axles. I drove 1/2 way to meet up with you & delivered a 3.55, non disconnect, HP 30 & 3.55, 29 spline 8.25 with a disc brake conversion kit installed for $600. I think you got a deal.
Good day, sir.
It seems that when you give someone a deal then even drive a distance to meet and deliver it that they would ***** about it, but a year and a half later.
You have a lot of nerve over a $10 item from a JY under the circumstances and time, details involved.
#899
I want to drop the hammer on the big Dave kit but I have a question someone might be able to answer. Im running rubicon wheels that require me to run spacers/adapters. I had to install grand Cherokee lugs already because the XJ ones were a little short for my liking in the with the adapters. From what I understand the disc swap backing plates are thicker, will my wheel studs be to short again? Anyone running this kit with wheel spacers?
#900
No, I don't lick fish.
I want to drop the hammer on the big Dave kit but I have a question someone might be able to answer. Im running rubicon wheels that require me to run spacers/adapters. I had to install grand Cherokee lugs already because the XJ ones were a little short for my liking in the with the adapters. From what I understand the disc swap backing plates are thicker, will my wheel studs be to short again? Anyone running this kit with wheel spacers?