Big David

I have decided that since my rear disc brake conversions have been such a success I would start selling these as well.
You will get WJ knuckles, caliper mounts, calipers & brake pads (IF available: to be used as cores or on the Jeep).
It will be $240. For $120 I will send you a set of calipers for your WJ. This price include shipping.

I only sell Akebone calipers. The Teves calipers are know to warp rotors.

PM me or post any questions you may have.

I don't have a write up, it's been done multiple times. Google is your friend but here is Martin to help explain it some.
https://www.google.com/url?sa=t&sour...RTfqhoIs_JjSHw

This will go great on your XJ, ZJ, or TJ if you have already converted to rear discs.

Fasts96xj

Helllo,
will you still be offering the XJ conversion parts or are you done with that?


Thanks.
Fasts96xj

Big David

I will be selling both.

cleenrob

if i didnt already have all this i would definatly buy the set from you..actually i bought the akebono calipers from you ..so buy stuff from big david!

Big David

Thank you sir.

frijolee

Pardon me, new here.

Tell me again how this works? Are you offering a junkyarding service and just happen to have a bunch of WJ's available local to you (but only pull from 03/04s for the akebono calipers?)

Do you pull ball joints/unit bearings as well? What about rotors? Do you have thoughts on building new rods (drag, track, tie rods) using the OEM tie rod ends? Just thinking about what all I'd be looking for if I pulled this myself. Obviously with used parts and consumables in particular some are good and some are junk.

Thanks in advance!

Big David

Welcome to Cherokee Forum.


You are correct. I am selling used WJ parts to be used on the XJ, ZJ, TJ, & the calipers can be swapped on a WJ if it is a 02 or older & came with the Teves calipers.
I don't offer used ball joints or rotors. Most people would rather buy those parts new.
The unit bearings would not work on any of the Jeeps listed other than the WJ.

I don't have a write up, tips or tricks but Google should help you out.

Good luck.

GentlemanJeep

Would this fit on stock 15 inch wheels?

cleenrob

no, 3.75 back spacing at least or bigger rims

Big David

Yeah, I think you HAVE to go to 16's. The calipers are frigging huge!

BNJeepsta

You don't "have" to but, very few 15" rims will work. If you want aluminum rims, they have to be 16's or bigger.

Big David

Thank you for the information.

Jbh97009

15" Raceline monsters (aluminum) with a 3.25" backspace fit over akebono calipers!

I may be interested in a set for my brothers Xj! This is a great price!

BNJeepsta

I was talking about stock wheels but, thanks for the info!

Big David

Sounds good. I already have the calipers, just need to get some knuckles.