Mark this thread as Unsold
FS[MidAtl]: (VA) Currie AntiRock with Modified Arms
#4
Junior Member
Thread Starter
Join Date: Jun 2011
Location: NoVA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Yes it will. I have 5.5-6" of lift and it clears no problem. The variables to consider are end-link length and wheel/tire combo.
These are the best photos I have showing the setup when it was installed (I was not taking photos of the swaybar as you can probably tell). I have 15x8 Black Rocks on 33x12.5's. I got some rubbing on the arms near full-lock, but it was nothing that hindered me too much on asphalt.
These are the best photos I have showing the setup when it was installed (I was not taking photos of the swaybar as you can probably tell). I have 15x8 Black Rocks on 33x12.5's. I got some rubbing on the arms near full-lock, but it was nothing that hindered me too much on asphalt.
#5
Member
Join Date: Jul 2011
Location: Greensburg, Pennsylvania
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Did you have your lower away bar mounts in the stock location or did you weld on different mounts? I'm at 5.5" of lift on 15x8 Cragars with 35x12.50s
#6
Junior Member
Thread Starter
Join Date: Jun 2011
Location: NoVA
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
#7
The bar is 39.5" long and the arms are 10 1/8" center-to-center. The arms were cut to length in order to clear my track bar bracket. If you don't want the arms, I'll knock off $20 from asking price. I'm getting ready to post my XJ for sale, so I'm just trying to clear out the garage of extra parts.
$150 SHIPPED
$100 LOCAL PICKUP
$150 SHIPPED
$100 LOCAL PICKUP
can you pm me your PayPal. I'll take it
Thread
Thread Starter
Forum
Replies
Last Post
jon-d
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
25
11-18-2022 12:38 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)