Machist

Hello!

I have Jeep Grand Cherokee 1997 limited, 4.0L
Trackballs are original and Axels are not alignment correct so I need adjustable trackball.

Front trackball is end of life and I need to replace asap!
I have 2" lift

So what you recommended?

I want get rid of that "tie-rod end" trackbar..
But like this http://www.rubiconexpress.com/Suspen...pn=R%2fERE1660
only For lifts between 4" - 6"

chrispl57

This one should work fine.

http://gardenstate4x4.com/collection...j-xj-zj-3-lift

Rockhead

Welcome to Cherokee Forum Machist. Look through here, maybe you will find what your looking for.
http://www.roughcountry.com/suspensi...rack-bars.html

Machist

Rockhead, there is only one and it Fits models with 4in - 6in suspension lift kits.
http://www.roughcountry.com/adjustab...-bar-1079.html

chrispl57, That "tie-rod end" is not good idea?

Why all models with better bracket are fits only 4" or more lifted model?

chrispl57

The end I fine. You only need to add a bracket if you have a lot of lift. That bracket actually drops the whole track bar to make up for the lifting. Under 4" all you need is a regular old track bar that is adjustable.

Machist

So this just "bolt-on"? no need to do any changes?
This shop is nearest to me: https://eshop.rbs-handel.de/en/catalog/product/574/

chrispl57

Yup that should be fine

Machist

Ok.. so this is what I put in front but there is no adjustable trackbar in rear axel?
What I put there

toasterknight

.

Machist

I ask is there any rear trackbar and this is answer
RBS Handel:

Hi

for 2 inch will not work, bigger than 2,75 inch requiered
with 2 you can use the normal one or a relocation bracket

best
Frank

sycoglitch

Machist. post in the Grand Cherokee section. It makes a difference. Many people here will think you referring too a XJ Cherokee but you have a ZJ. You can get better answers from there. Some GC users dont look at the XJ section. Good luck

Machist

Sorry.. I didn't notice that section at all..
There is now new thread: https://www.cherokeeforum.com/f5/tra...6/#post3178880

831xj

Just buy a stock one and move the frame side hole over 1/2-3/4".

sycoglitch

Its ok. We always here to help and posting in the right place gets you the right answers. Someone posted innyour other thread the only answer you should follow. IRO makes one and they have quality products.