Tire Question
#1
Newbie
Thread Starter
Join Date: Jul 2022
Location: NJ
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee (XJ)
Engine: 4.0L
Tire Question
I plan on doing a 6.5 lift on my 01’ xj, what size tire could I run without cutting the fenders? And what’s the biggest I could run on the stock axles
#2
CF Veteran
Join Date: Aug 2018
Location: Idaho
Posts: 1,734
Received 288 Likes
on
245 Posts
Year: 89
Model: Cherokee (XJ)
Engine: Peddles
Ive not found Lifting to gain much tire clearance.
seems 33s will rub the same from 2-6" of lift.
I run 35s with 4-5" of lift my lift height is kinda unknown to me.
the tires are bump stopping on my front fenders and ive removed a **** ton of fender. Like 6 8" of fender
Im sure 40s would bump stop but id lose alittle compression travel
seems 33s will rub the same from 2-6" of lift.
I run 35s with 4-5" of lift my lift height is kinda unknown to me.
the tires are bump stopping on my front fenders and ive removed a **** ton of fender. Like 6 8" of fender
Im sure 40s would bump stop but id lose alittle compression travel
#4
CF Veteran
35s and if you have the Chrysler 8.25 rear it will be fine, for the front I would swap a high pinion Dana 30 in, you should also regear the axles to 4.56.
Thread
Thread Starter
Forum
Replies
Last Post
patnok
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
06-11-2009 11:10 PM
thebrow89
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-16-2009 11:58 AM
Preacher Dave
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
10-29-2008 08:12 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)