BamaJosh

Good afternoon,
I have 2000 XJ. I got my build sheet from Chrysler and it says I have the C 8.25 in it. Bought gears for the install in the rear and bought another D30 with 4.88's already in the front. Took the Jeep to the gear installer and he just called and said I have a D35 in there. So sometime before i got the Jeep somebody installed a D35.

My question is this, I can get a C 8.25 from the junkyard. Should it be just a straight swap on the rear end? I have about 5" of lift currently. I also had the drum brakes completely rebuilt 2 summers ago. Will any of that swap over to the C8.25? Do I need to get another driveshaft?

Thanks,
Josh

ohio95xj

Can you post pics of the rear end? Also. What year/jeep did the 30 come out of? Is it low pinion or high pinion. I would not gear a LP 30 to 4.88. As far as the rear end question. Yes you can find a 97+ 8.25 and it will bolt right in. As for the drive shaft, do you have an SYE, you definitely should at 5" of lift. Either way. I doubt you will need a new driveshaft for the 8.25 at that lift height.

2000chersport

Get a 97+ 8.25 from the JY

Fred/N0AZZ

Yes the 97+ 8.25's were the 29 spline axles 96 down were not. You will also need new u-bolts for the 8.25 different size than the D-35.

freegdr

7/96 could have 29s . gotta pull a axle and count splines.

caged

yes, do snap a pic of your rear diff so we can all have a laugh at the gear installer. i'm sure no one would swap out an 8.25 for a crappy d35.

if your diff has a sort of square bottom, you definitely have the 8.25.

t_long

Maybe you can just tell for yourself. Have you ever seen this before?

caged

that pic is redundant.

for the untrained eye, the 8.25 looks like the d35 without knowing the sizes.
and that d35 is the old style with the screw plug. his would have the rubber plug anyway.


take a pic with your phone, it's that easy.

BamaJosh

Here is a pic of the rear axle. Going to meet a guy about an 8.25 axle for $75.

caged

yup. that's a 35

and a pre 91 at that. so possibly non c-clip

JPXJMOAB

yep thats the Dana 35

Fred/N0AZZ

That goes to show you that some people will do really dumb things to their XJ's, I would have never thought that....a D35.

XJlimitedx99

Don't believe your build sheet next time

That's strange that somebody would swap that in there. Atleast your gear installer told you before he tore the axle down. GL with finding an 8.25. I think you'll find the e brake might need some creativity when swapping axles. I've never done it, but that's what I've read.

BamaJosh

I already picked up an 8.25 for 75 bucks. Not a 29 spline one but I will deal with that when I get there. I don't do any hardcore wheeling so I think I will be fine.

BamaJosh

I never had an ebrake before so maybe I might actually be able to have one. Thanks for ya'lls help.