Paint non rust and non chip?
#1
Member
Thread Starter
Join Date: Jan 2014
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Paint non rust and non chip?
Looking to paint the sides of my XJ sand the surface rust off and put something down thats durable wont rust or chip off i have tried multiple paints on various parts of my jeep tie rods and what bot always chips and rusts
What so you guys use?
What so you guys use?
#4
CF Veteran
Join Date: Sep 2009
Location: ☼ Blackhole Sun
Posts: 8,567
Likes: 0
Received 18 Likes
on
16 Posts
Year: My Jeep is a GMC
If you don't want the paint scratched, just leave it in the garage.
The following users liked this post:
Tgramsey (07-01-2019)
#5
Beach Bum
Oh yea, I texture bedlined the tube steps on rock sliders and the Wifes legs slid across them when exiting vehicle, she was not happy.
Last edited by SteveMongr; 09-06-2015 at 08:53 PM. Reason: added picture
#6
Member
Thread Starter
Join Date: Jan 2014
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Scratches i dont care about the **** chips off no matter what prep work the paint is ****ty it was using looking for a durable paint if bedliner is durable i would do that cause its the bottow 4" of my jeep that needs paint
#7
Seasoned Member
Trending Topics
#10
CF Veteran
Join Date: Jun 2011
Location: Louisville,KY
Posts: 8,014
Likes: 0
Received 14 Likes
on
14 Posts
Model: Cherokee
Rocker guard is also called stone guard,You ever seen the bottom of a cars rockers that looked kinda bumpy.Thats what it really is,Its a step above paint but not as hard or rough as bedliner can be.
#11
Seasoned Member
Not sure if you are searching rattle can only... I prefer the Qt. can and an El cheapo applicator gun. It's EZ to do and you get more coverage for the $ than rattle cans.
Rocker shutz can also be painted over.
#12
Member
Thread Starter
Join Date: Jan 2014
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
My air compresser crapped out and cant spray that way. Have to rattle can
#15
Seasoned Member
Join Date: Oct 2013
Location: Long Island, NY
Posts: 356
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999 Limited
Model: Cherokee (XJ)
Engine: 4.0L I6 Power Tech
I painted my tie rods and drag link with Metal Mask by POR 15. It's extremely durable if you don't mind the silver color, I may do my sway bar before the winter. As mentioned by almost everyone, prep is the key.