My jeep sits unlevel
#20
Member
Thread Starter
Join Date: Dec 2014
Location: Virginia
Posts: 204
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0l
I did measure the difference at the frame and is about 3/4 of an inch. It is not a real problem but I notice it ever day when walking up behind my jeep and after spending a good amount of money to lift it would like for it to be level. I was mostly looking to see if there was a way to get it level without getting new leaf spring since these are basically new. I know putting a block under that one side would be a bad idea, but would buying a fully adjustable shackle and set them at different lengths any better of idea?
#22
Member
Join Date: Dec 2010
Location: NW FL
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
#23
Seasoned Member
Join Date: Jul 2014
Location: Albuquerque
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L Inline 6
#24
Member
Thread Starter
Join Date: Dec 2014
Location: Virginia
Posts: 204
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0l
I measured the frame and from side to side it is very close so I did not rotate the leaf springs but I would still like to make the jeep level. From the back of the jeep it looks unlevel and from the side.
Passenger
Driver
Passenger
Driver