Interior LED Conversions - Everything I know. XJ, TJ, ZJ
#17
Former Sponsor
Thread Starter
97-01 XJ Instrument Sets:
Cluster parts: ordered last week
Transfer case parts: in-stock
Rocker switch parts: in-stock
HVAC parts: I'm saving for the $2000 needed to have the parts made.
84-96 XJ Instrument Sets:
Cluster: In-Stock (small quantity)
Transfer/Shifter: In-Stock (small quantity)
Rocker Switches: on-order (white in-stock)
HVAC: In-Stock
I have white in-stock for the 84-96, but I'm waiting to sell them until I have all variations available.
#18
CF Veteran
Join Date: Dec 2011
Location: PA KOTUFU!
Posts: 1,777
Likes: 0
Received 16 Likes
on
15 Posts
Year: 1998
Engine: 4.0L 162,000
I think that I used these in the past-
For the HVAC
Super Bright LEDs - Instrument Cluster and Gauge Backlights
The Neo Wedge Series
You need 3 of the NEOx 4mm - NOT Neo XHP
#21
Junior Member
I decided to make a new account since I broke the old one. No super crazy updates since November, but I have learned a few things.
XJ Fun fact - some 1997 models XJ have the 84-96 style front and/or rear overhead lights!
XJ Export (non- North America) models sometimes have a three-lamp dome light assembly in the back.
WJ visors don't play well with LEDs.
WJ door panels sometimes require new sockets when installing LEDs.
TJ interiors are pretty simple.
TJ 97-98: Floors 2x 1156; Overhead 1x T10 (flat)
TJ 99-02: Floors 2x T10 (flashlight style); Overhead 1x T10 (flat)
TJ 03-06: Floors 2x T10 (flashlight style); Overhead 2x 42mm
TJ Change years sometimes have a mix of the older and newer style parts. Check your TJ's bulb types before buying parts.
JK - limited options for upgrades due to some lights being soldered in place.
JK Rear cargo requires a CANBUS style light.
JK Front dome/overhead lights can also be replaced.
JK Small lights in the overhead information module cannot be replaced without soldering. (These should be LED already).
JK Floor well lights are also soldered in place. It's possible to wire in new lights, but requires a bit of work.
JK Some models have LED interior from factory(?).
XJ Fun fact - some 1997 models XJ have the 84-96 style front and/or rear overhead lights!
XJ Export (non- North America) models sometimes have a three-lamp dome light assembly in the back.
WJ visors don't play well with LEDs.
WJ door panels sometimes require new sockets when installing LEDs.
TJ interiors are pretty simple.
TJ 97-98: Floors 2x 1156; Overhead 1x T10 (flat)
TJ 99-02: Floors 2x T10 (flashlight style); Overhead 1x T10 (flat)
TJ 03-06: Floors 2x T10 (flashlight style); Overhead 2x 42mm
TJ Change years sometimes have a mix of the older and newer style parts. Check your TJ's bulb types before buying parts.
JK - limited options for upgrades due to some lights being soldered in place.
JK Rear cargo requires a CANBUS style light.
JK Front dome/overhead lights can also be replaced.
JK Small lights in the overhead information module cannot be replaced without soldering. (These should be LED already).
JK Floor well lights are also soldered in place. It's possible to wire in new lights, but requires a bit of work.
JK Some models have LED interior from factory(?).
Last edited by akasnajo; 02-09-2016 at 10:06 PM.
#22
Banned
Join Date: Oct 2013
Location: WNY
Posts: 933
Likes: 0
Received 45 Likes
on
45 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I decided to make a new account since I broke the old one. No super crazy updates since November, but I have learned a few things. XJ Fun fact - some 1997 models XJ have the 84-96 style front and/or rear overhead lights! XJ Export (non- North America) models sometimes have a three-lamp dome light assembly in the back. WJ visors don't play well with LEDs. WJ door panels sometimes require new sockets when installing LEDs. TJ interiors are pretty simple. TJ 97-98: Floors 2x 1156; Overhead 1x T10 (flat) TJ 99-02: Floors 2x T10 (flashlight style); Overhead 1x T10 (flat) TJ 03-06: Floors 2x T10 (flashlight style); Overhead 2x 42mm TJ Change years sometimes have a mix of the older and newer style parts. Check your TJ's bulb types before buying parts. JK - limited options for upgrades due to some lights being soldered in place. JK Rear cargo requires a CANBUS style light. JK Front dome/overhead lights can also be replaced. JK Small lights in the overhead information module cannot be replaced without soldering. (These should be LED already). JK Floor well lights are also soldered in place. It's possible to wire in new lights, but requires a bit of work. JK Some models have LED interior from factory(?).
I'm patiently waiting for you to work everything out with the 97+ gauge and console bulbs. I think you just needed money to make the bulk order?
#23
Senior Member
Join Date: Jun 2014
Location: Eagle River, Alaska
Posts: 925
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1999
Model: Cherokee (XJ)
I decided to make a new account since I broke the old one. No super crazy updates since November, but I have learned a few things.
XJ Fun fact - some 1997 models XJ have the 84-96 style front and/or rear overhead lights!
XJ Export (non- North America) models sometimes have a three-lamp dome light assembly in the back.
WJ visors don't play well with LEDs.
WJ door panels sometimes require new sockets when installing LEDs.
TJ interiors are pretty simple.
TJ 97-98: Floors 2x 1156; Overhead 1x T10 (flat)
TJ 99-02: Floors 2x T10 (flashlight style); Overhead 1x T10 (flat)
TJ 03-06: Floors 2x T10 (flashlight style); Overhead 2x 42mm
TJ Change years sometimes have a mix of the older and newer style parts. Check your TJ's bulb types before buying parts.
JK - limited options for upgrades due to some lights being soldered in place.
JK Rear cargo requires a CANBUS style light.
JK Front dome/overhead lights can also be replaced.
JK Small lights in the overhead information module cannot be replaced without soldering. (These should be LED already).
JK Floor well lights are also soldered in place. It's possible to wire in new lights, but requires a bit of work.
JK Some models have LED interior from factory(?).
XJ Fun fact - some 1997 models XJ have the 84-96 style front and/or rear overhead lights!
XJ Export (non- North America) models sometimes have a three-lamp dome light assembly in the back.
WJ visors don't play well with LEDs.
WJ door panels sometimes require new sockets when installing LEDs.
TJ interiors are pretty simple.
TJ 97-98: Floors 2x 1156; Overhead 1x T10 (flat)
TJ 99-02: Floors 2x T10 (flashlight style); Overhead 1x T10 (flat)
TJ 03-06: Floors 2x T10 (flashlight style); Overhead 2x 42mm
TJ Change years sometimes have a mix of the older and newer style parts. Check your TJ's bulb types before buying parts.
JK - limited options for upgrades due to some lights being soldered in place.
JK Rear cargo requires a CANBUS style light.
JK Front dome/overhead lights can also be replaced.
JK Small lights in the overhead information module cannot be replaced without soldering. (These should be LED already).
JK Floor well lights are also soldered in place. It's possible to wire in new lights, but requires a bit of work.
JK Some models have LED interior from factory(?).
I ordered your xj 97 interior kit today, but I think I'm one of the people with the 96 style one light overhead light. What should I do?
#24
Junior Member
Custom parts would be ideal, but I've had to concede that it's not in the cards. Someday maybe, but no time soon.
The compromise solution will be better than stock and better than the LEDs used in the past, but I expect it to still be dim compared to the rest of the instrument lights.
Estimated completion is the first week of March. I'll post in the accessories thread when I need someone to test them, but I'm not offering them for sale or providing any info of that sort.
Speaking of sales, if there is a reseller out there that has a hole in their product line where interior LEDs go, I have the thing to fill that void!
Last edited by akasnajo; 02-09-2016 at 10:57 PM.
#25
Member
Join Date: Oct 2009
Location: Kent, WA
Posts: 236
Likes: 0
Received 1 Like
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0
I put together a fairly detailed, illustrated guide on replacing my dash lights with LED's and wiring up new sockets. If you want more info about pre-97 dash lights, check it out:
https://www.cherokeeforum.com/f89/le...grades-221358/
https://www.cherokeeforum.com/f89/le...grades-221358/
#27
Junior Member
I put together a fairly detailed, illustrated guide on replacing my dash lights with LED's and wiring up new sockets. If you want more info about pre-97 dash lights, check it out:
https://www.cherokeeforum.com/f89/le...grades-221358/
https://www.cherokeeforum.com/f89/le...grades-221358/