Dana 30 LP set up question
#1
Member
Thread Starter
Join Date: Mar 2013
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Dana 30 LP set up question
Putting 4.10's in my ol'girl tomorrow night and while making my set up bearings tonight my new pinion for the front doesn't have the pinion depth variance engraved into it. It only has the master housing depth (3.625).
I have set up dozens of 8.8 and 10 bolts but have never run into this. Does a MHD of 3.625 mean that the variance is basically 0.000 and I should work my shims from there with the currently installed pinion?
I have set up dozens of 8.8 and 10 bolts but have never run into this. Does a MHD of 3.625 mean that the variance is basically 0.000 and I should work my shims from there with the currently installed pinion?
Thread
Thread Starter
Forum
Replies
Last Post
aa7kn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-23-2015 09:08 AM
Cherokee_Mike
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-05-2015 09:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)