Swapping axles need help!
#1
Newbie
Thread Starter
Join Date: Jun 2012
Location: vermont
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 6cyl 4.0ltr
Swapping axles need help!
I may be getting a second Cherokee, mine is pretty tired but i was wondering if there would be a problem putting a 99 front axle into an 01? I just put some heavy duty off roading mounts for my control arms on and really want to swao em over.
#3
If you're going to swap the front axle, you'd be better off finding one from a 98 or earlier. 99-01 have the low pinion dana 30, while the ealier models have a high pinion D30. As far as I know, everything is interchangeable between the two axles except for gears.
They're all direct bolt ins.
They're all direct bolt ins.
#7
Junior Member
Join Date: Apr 2012
Location: Delaware
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
(Jeep Wrangler (TJ) low pinion left vs Cherokee (XJ) high pinion right)
Site I got it from. http://www.therangerstation.com/tech_library/Dana30.htm
Trending Topics
#8
Newbie
Thread Starter
Join Date: Jun 2012
Location: vermont
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 6cyl 4.0ltr
is it possible to do? obviously we would have to do some swapping of other stuff, but I would have both jeeps so I would have all or most of the parts to swap right?
#11
CF Veteran
Join Date: Sep 2010
Location: Salt Lake City, UT
Posts: 4,968
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
It should just bolt in no problem, the LP drive-line is a little longer IIRC, if your lifter it shouldn't be a bad thing, If your stock height and plan on staying there I would swap drive-lines too just so the length is already correct
(assuming they both are autos/manual)
(assuming they both are autos/manual)
#15
CF Veteran
Join Date: Feb 2012
Location: Hamburg, NY
Posts: 1,258
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
"I'm not a crook!"
I don't mean to hi-jack this forum , but since we are talking about swappin out axles I am rebuilding a High Pinion D-30 and have broken zerks. Can I replace the caps on the top of the "C" bracket? If so how. Any help would be great....