2wd auto to 4wd manual conversion electrical guidance.
#1
Seasoned Member
Thread Starter
Join Date: Nov 2015
Location: North Louisiana
Posts: 373
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0 HO
2wd auto to 4wd manual conversion electrical guidance.
I have a '94 2wd auto that I'm converting to fourwheel drive using my old '91 with ax-15.
I have the '91 on the rack stripping it down atm.
Are there any electrical bits that I need to remove from the wiring harness?
Also is it possible to have the part time indicator on the dash of the 2wd?
I have the '91 on the rack stripping it down atm.
Are there any electrical bits that I need to remove from the wiring harness?
Also is it possible to have the part time indicator on the dash of the 2wd?
#3
Seasoned Member
Thread Starter
Join Date: Nov 2015
Location: North Louisiana
Posts: 373
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0 HO
I was researching this and read that you could swap over the computer and just tie into some of the existing wiring.
I just can't find much information on the earlier models, like 91-96.
I just can't find much information on the earlier models, like 91-96.