onew1ckedxj

Gave it some lift and threw some 31s under her!

nujeepguy

just pull up carpet and pour water in by wipers on driver side,one cup at a time, about 6-8 cups. watch pass side floor foot area.

NewKindOfClown

You poor guys. I don't have any problems with windshield leaks in my Wrangler

salad

Bang up job keeping the rain outta yer face like that eh Lol

5-Speed

Haha you got a whole different problem. Your window wont release all the collected water...we need to keep it out, you need to let it out.

rcguymike

So that's what those tabs are for...never really thought about it and never seen it used before...LOL!

Basslicks

lol... heeeeeere's yer siiiiiiiggggnnnnn

unidentifiedbomb

Set the TPS, was 2vs off. Replaced the distributor gasket, thing was petrified and split into two.

onew1ckedxj

Repaired my non working passenger window!

Guywitha92

Bought a new heim joint for my track bar.

TwistedWrench

Nice, looks great man.

jcollege

Took her to get emission done, threw a CEL on the way to the shop, turned out to be a P0300 code, the joy of finding the problem starts this weekend.

EatonXJ

Some people might say just clear the code with the Torque OBDII app and a BT scanner. Don't just disconnect the battery. That will set all the monitors to not ready. In VA a 2000 and older vehicles will pass with 2 not ready codes. If it's an 01 you only get one so if there is no other problems it should pass. Some people may have done that with their modified MS3 to get it to pass.

http://www.deq.virginia.gov/Programs...DMonitors.aspx

But then fix the problem.

salad

Clearing DTCs also resets I/M readiness state. But you keep your radio presets.

93 Crud

Tore apart the overhead console and the VIC, cleaned all of the connector contacts, put it all back together, and it works just fine, now.

Replaced the cigarette lighter fuse, since it was crapped out. Lighter works again.

Used zip-tie as "welding rod," and used a soldering iron to weld/fix the weakened tab on the passenger side bus fuse cover.