Gary Briggs

They are ok, they do fine on the trail. Just have to be careful not to puncture the side wall.

I've had them for over 20k miles and they still have decent tread. I certainly got my $575 out of them.

884x4

This

884x4

To this

rabies

those rockers with 3x6 sliders.......you got pics of install. looks like you cut out the rockers. i need to do the same i have cancer rust...i needs pics brrrrrrrrro

Gary Briggs

I didn't take many pics but it's not that hard and if you google search there are a few "how to's" on here and NAXJA.

There's a seam on the underside of the rocker that's parallel to the "frame", that's where I made the cut on the underside. Under the doors is pretty self explanatory.

It's really not that hard.

XJlimitedx99

Got my TnT crossmember mocked up and ready to be installed

884x4

Finnaly! Axle side uca bushings are a ****!



Nice new hardware too

WhiteDevil1311

Whered you get the hardware? Ordering GC LCAs but cant find the hardware.

884x4

Ace hardware, just took the new bushing sleeves in and got the tightest fitting grade 8 bolt I could.
I think it's a 7/16ths but don't hold me to it!

WhiteDevil1311

Cool. Good to know. I ordered the rubicon express lca mounts and noticed they are cam bolt provisioned. I dont need adjustable but need to find new hardware. Im ordering the moog lcas for the grand cheHEROkee as they fit the mounts and well at 26 bucks a pop via summit seals it

884x4

That ain't bad!

ken78745

Cut the front fenders



















I am planing on running 37" so cutting to fit my 30" tires for now 6.5" lift coming soon

Dumajones

Don't forget to cut and fold this peace

kelly88xj

going to try and get the nsg370 cps wired so i can start my 88

CanXJ

Put these on, covers dent on passenger side quite well.