ikatkoo

Hey guys so i bought some after market headlights from a buddy for my cherokee but there the kind were the bulb goes in them from the back separately. So my question is where can i get an adapter for the bulb and my second question would be culd i splice wires from stock wireing harness and the bulb adapter? Like do yall think itll work that way.?

95 Cherokee 4.0L

Kris smith

Do you have pics of them

ikatkoo

ikatkoo

Kris smith

You put a normal h4 style bulb in there you see the slots at the 12 5 and 7 o clock postions thats where the ears of the bulb sit to locate it.

Kris smith

The wire hpolds the light bulb tite

ikatkoo

Will h4 style bulbs fit perfectly into stock harness?

roadraje

Yes but it's highly recommended you upgrade the harness with a Putco or similar.

Dumajones

To use those h4 housings you need a H4 bulb and a upgraded wire harness. You can run the H4 bulbs and those housings alone, but you will burn up your headlight switch.. here is some info on upgrading your headlights.
__________________________________________________ _________________
Originally Posted by xjsnake https://www.cherokeeforum.com/f2/headlights-151196/index2/ - post2069179https://www.cherokeeforum.com/f2/headlights-151196/index2/ - post2069179
Upgraded headlights the legal (ish) way...

1) Get a new headlight harness.

You can make your own http://www.go.jeep-xj.info/HowtoHeadlightLoom.htm

Or you can buy one: http://www.eautoworks.com/Putco-H4--...s-PRD7540.aspx

The eautoworks harnesses used to be quite cheap until everyone on this forum started recommending them and the price was raised accordingly.

You can pick them up for $29.99 here http://www.lmctruck.com/icatalog/csd/full.aspx?Page=48 part number 36-3580. It says it fits a chevy blazer but it's the same as the eautoworks harness and I'm running the LMC harness in my XJ.

There are other more expensive options for pre-made harnesses but I'm not super familiar with those.

2) Upgrade to H4 housings

There are two types of regulations pertaining to headlight housings. There are DOT approved housings which are legal in the US and there are Ecode lights which are European housings and aren't legal in the US although many people use them as they are considered superior housings due to the light pattern.

DOT
Rampage http://www.quadratec.com/products/97009_501.htm
IPF http://www.quadratec.com/products/97017_1600.htm
Delta http://www.quadratec.com/products/97009_121.htm
Hella http://www.quadratec.com/products/97009_02.htm

Ecode
Autopals (look on ebay for Autopal 200mm H4 housing)
Hella http://www.rallylights.com/detail.aspx?ID=744
Cibie http://www.clearcorners.com/products/cibie/

Personally I won't buy housings that have plastic lenses, I much prefer glass but your mileage may vary.

3) Get good bulbs

Some of the above housings come with bulbs included with them. I tend not to recommend bulbs as the choices are extremely vast and everyone has their own preferences as to color and wattage.

4) Aim your headlights properly!

I can't say enough how much improperly aimed headlights annoy me on the road plus you are wasting all that time and effort to upgrade the lighting if you don't aim the light where it does the most good... http://www.naxja.org/forum/showthread.php?t=78017

5) On HID Lights

I do not recommend HID's for use in XJ's... People will show links to cheap HID kits and "Projectors" off of ebay and other sites which will give you a lot of light and will also throw a lot of light in all directions making you very visible to police and possibly blinding other drivers.


Read http://www.danielsternlighting.com/t...nversions.html for a well written description of the problems with HID kits.

When using HID's you need a true projector housing. I'm sure people will chime in and say they run HID's and ebay housings and have had no problems but I'm describing the legal (ish) way.

If you want to go down the road of HID's, take a look at what true projector housings cost http://www.kbcarstuff.com/6054-200mm...-p/xd-6054.htm
http://www.brightheadlights.com/hid-upcoming.htm
or you can buy the projectors and retrofit them into existing housings if you are so inclined: https://www.cherokeeforum.com/f58/hea...9/#post1391556

There are a myriad of options available to consumers with the limiting factor being cost. One can spend under $100 and have significantly upgraded their lighting or they can spend $1000 and upgrade their lighting more. It's all in how much money you want to spend.

For those wanting to do some of these upgrades but not necessarily all I would do them in the following order:
1) Headlight Harness (major improvement even with sealed beams)
2) Housings and Associated Bulbs
3) Hid and Projectors (Cost prohibitive to do correctly)


For installation of the harness and housings see this excellent write up: https://www.cherokeeforum.com/f59/my-h4-upgrade-114440/

Disclaimer: Always check your local and state laws as some places have more stringent lighting laws than others... I am in no way associated with any of the above companies and none of what I say should be taken as the absolute truth or only way to do things. Flame on...

__________________