2 door cherokee club
#946
Member
Join Date: Jun 2012
Location: Gastonia, NC
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
The tires are 245/70/16's. The rear springs are the Dorman HD replacements which ended up netting me a slight lift. The from is just 2" rubber spacers I got from some jeep in the yard. Not just stacked rubbers. Have the shackles to go with it but it's pretty much dead level and I love the way it sits. After all was put in place and set back down, I was quite surprised to see the track bar sit right back into pace.
#948
Junior Member
Join Date: Aug 2014
Location: NY
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998, 1997
Model: Cherokee
Engine: 4.0 6Cyl, 4.0 6Cyl
#949
Senior Member
Join Date: Apr 2011
Location: west virginia
Posts: 585
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
No rubbing or trimming it was like this when I got it in the Rear it just has 2 inch blocks and in the front I don't know if it has 3 inch coil springs or 2 inch if they even make a 2 inch lift coil spring. It doesn't have any spacers. So I'm thinkin it has 3 inch springs becouse it sits realy level with the rear
#950
CF Veteran
No rubbing or trimming it was like this when I got it in the Rear it just has 2 inch blocks and in the front I don't know if it has 3 inch coil springs or 2 inch if they even make a 2 inch lift coil spring. It doesn't have any spacers. So I'm thinkin it has 3 inch springs becouse it sits realy level with the rear
#952
CF Veteran
The bug
Wow! john deer green.
Love your rig the way it sits. I wish it was mine. I now have the bug too. I am not sure I can keep up with the cost though. I bought mine already lifted and the guy I bought it from had put 33's on it way before it was ready for that size of tires. So I traded for 31's until I get it there. Good luck with your build!
Love your rig the way it sits. I wish it was mine. I now have the bug too. I am not sure I can keep up with the cost though. I bought mine already lifted and the guy I bought it from had put 33's on it way before it was ready for that size of tires. So I traded for 31's until I get it there. Good luck with your build!
#953
Junior Member
Join Date: Aug 2014
Location: NY
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998, 1997
Model: Cherokee
Engine: 4.0 6Cyl, 4.0 6Cyl
#954
Senior Member
Join Date: Apr 2011
Location: west virginia
Posts: 585
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Wow! john deer green.
Love your rig the way it sits. I wish it was mine. I now have the bug too. I am not sure I can keep up with the cost though. I bought mine already lifted and the guy I bought it from had put 33's on it way before it was ready for that size of tires. So I traded for 31's until I get it there. Good luck with your build!
Love your rig the way it sits. I wish it was mine. I now have the bug too. I am not sure I can keep up with the cost though. I bought mine already lifted and the guy I bought it from had put 33's on it way before it was ready for that size of tires. So I traded for 31's until I get it there. Good luck with your build!
#956
#958
Finally got on here bought my 95 Cherokee sport 2door 5spd manual I've done a lot of work in the last 3 months
* 8" rustys long arm lift
*Mickey Thompson Baja radial mtz 35x12.50 R15
*Rustys skid plates front to rear
*D30 w/4.88 and Aussie locker and 8.8 swap rear w/4.88 and Detroit locker
* Motor,Trans and Transfer case rebuild
* ORF front bumper with Warn 9000 lbs winch
* 8" rustys long arm lift
*Mickey Thompson Baja radial mtz 35x12.50 R15
*Rustys skid plates front to rear
*D30 w/4.88 and Aussie locker and 8.8 swap rear w/4.88 and Detroit locker
* Motor,Trans and Transfer case rebuild
* ORF front bumper with Warn 9000 lbs winch
#959
CF Veteran
Join Date: Jul 2010
Location: WNY
Posts: 1,971
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 High Output
Finally got on here bought my 95 Cherokee sport 2door 5spd manual I've done a lot of work in the last 3 months
* 8" rustys long arm lift
*Mickey Thompson Baja radial mtz 35x12.50 R15
*Rustys skid plates front to rear
*D30 w/4.88 and Aussie locker and 8.8 swap rear w/4.88 and Detroit locker
* Motor,Trans and Transfer case rebuild
* ORF front bumper with Warn 9000 lbs winch
* 8" rustys long arm lift
*Mickey Thompson Baja radial mtz 35x12.50 R15
*Rustys skid plates front to rear
*D30 w/4.88 and Aussie locker and 8.8 swap rear w/4.88 and Detroit locker
* Motor,Trans and Transfer case rebuild
* ORF front bumper with Warn 9000 lbs winch
#960
Senior Member